Heterocyclic Building Blocks-Isothiazole

Name is Isothiazole, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 288-16-4, its synthesis route is as follows.

Compound 1 (20 g, 0.235 mol) was added to dry 100 ml of diethyl ether under nitrogen atmosphere and stirred to dissolve,And then cooled to 0 C or lower, n-butyllithium (0.24 mol) was added dropwise thereto, and the temperature was kept below 0 C during the dropwise addition, and the reaction was carried out until the compound 1 was added.To the reaction solution was added bromine (0.5 mol), and the mixture was kept at 0 C or less during the dropping,After completion of the dropwise addition, the temperature was gradually raised to room temperature, and after stirring for half an hour, the hydrochloric acid solution was added thereto(2N, 500 ml).And the aqueous phase was extracted with ether (200 ml * 3) and discarded. The combined organic phase and sodium dithionite solution were washed(100 ml * 2), dried over anhydrous sodium sulfate, filtered and concentrated to dryness to give compound 2 as a yellow oil.In this step, the ether can also be replaced with a solvent such as methyl ether, dimethyl ether, tetrahydrofuran, 1,4-dioxane and the like.

288-16-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,288-16-4 ,Isothiazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Tianjin Jinyao Group Co., Ltd.; Li Jing; He Guangjie; Yang Xinyi; Wang Shuli; Chen Liying; Hu Xiaoyun; Sun Liang; (37 pag.)CN106890177; (2017); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

936-16-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, cas is 936-16-3,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

2-[{1-(tert-Butyl)-5-(4-cyclohexylphenyl)-1H-pyrazol-3-yl}methyl]-2,3-dihydro[d]isothiazole 1,1-dioxide (Compound 36) (0327) To a solution of {1-(tert-butyl)-5-(4-cyclohexylphenyl)-1H-pyrazol-3-yl}methanol (101 mg, 0.323 mmol) in were added PPh3 (71.8 mg, 0.655 mmol), and CBr4 (217 mg, 0.655 mmol) at 0¡ã C., followed by stirring at the same temperature for one hour to give {1-(tert-butyl)-5-(4-cyclohexylphenyl)-1H-pyrazol-3-yl}methyl bromide. When the reaction was completed as measured by TLC (Hexane:EtOAc=2:1), drops of N,N-dimethylformamide (1.5 mL) in 1,2-benzisothiazoline-1,1-dioxide (57.1 mg, 0.388 mmol) were slowly added. (0328) At the same temperature, potassium carbonate (447 mg, 3.23 mmol) was added, and the resulting solution was stirred for a day. When the reaction was completed as measured by TLC (Hexane:EtOAc=2:1), water was added dropwise, after which extraction was carried out with ethyl acetate and brine. The organic layer was dried over anhydrous magnesium sulfate, filtered, and concentrated in vacuo. The concentrate was purified by column chromatography (Hexane:EtOAc=4:1) to afford the title compound (55.4 mg, 31percent, white solid). (0329) M.P. 135.7-141.5¡ã C.; (0330) 1H NMR (300 MHz, CDCl3) delta 7.83 (d, J=7.5 Hz, 1H), 7.63-7.50 (m, 2H), 7.40 (d, J=7.5 Hz, 1H), 7.30-7.20 (m, 4H), 6.24 (s, 1H), 4.53 (s, 2H), 4.45 (s, 2H), 2.56 (brs, 1H), 1.92-1.77 (m, 5H), 1.48-1.27 (m, 14H); (0331) 13C NMR (75 MHz, CDCl3) delta 148.5, 144.3, 143.4, 135.4, 134.3, 132.5, 131.3, 130.3, 128.9, 126.2, 124.5, 121.4, 109.0, 61.1, 50.0, 44.3, 41.4, 34.4, 31.2, 26.9, 26.1

The chemical industry reduces the impact on the environment during synthesis,936-16-3,2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; KOREA INSTITUTE OF SCIENCE AND TECHNOLOGY; NAM, Ghil Soo; CHOI, Kyung Il; KIM, Jung Hyun; PAE, Ae Nim; HONG, Jin Ri; LEE, Jae Kyun; (30 pag.)US2015/329533; (2015); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 27148-03-4, its synthesis route is as follows.

To a thf solution (20mL) of [Ru3(CO)12] (100mg, 0.16mmol) was added tsacH (63mg, 0.32mmol). The reaction mixture was heated to reflux for 4h, after which time the reaction mixture was then allowed to cool at room temperature. The solvent was removed under reduced pressure and the residue chromatographed by TLC on silica gel. Elution with n-hexane/CH2Cl2 (v/v, 1:1) developed four bands. The first band was unreacted [Ru3(CO)12] (14mg). The second band afforded [H2Ru3(CO)7(mu-N,S-tsac)(mu-C,N-C6H4CNSO2)(mu3-S)] (2) as orange crystals (24mg, 17%) after recrystallization from n-hexane/CH2Cl2 at 4C. The third band afforded two types of crystals (yellow and orange) after recrystallization from n-hexane/CH2Cl2 at 4C which were physically separated by hand. The orange crystals were characterized as [Ru2(CO)6(mu-N,S-tsac)2] (1) (7mg, 4%), while the yellow crystals were characterized as [Ru4(CO)12(mu-N,S-tsac)2(mu4-S)] (3) (10mg, 7%). The fourth band afforded [H2Ru5(CO)13(mu-N,S-tsac)(mu-C,N-C6H4CNSO2)(mu3-S)(mu4-S)] (4) (14mg, 11%) as orange crystals after recrystallization from n-hexane/CH2Cl2 at 4C. Data for 2: Anal. Calc. for C21H10N2O11Ru3S4: C, 28.10; H, 1.12; N, 3.12. Found: C, 28.32; H, 1.15, N, 3.14%. IR (nuCO, CH2Cl2): 2124vs, 2067vs, 2060sh, 2012s cm-1. 1H NMR (CDCl3): delta 8.29 (d, J 8.0Hz, 1H), 8.02 (m, 1H), 7.91 (t, J 7.2Hz, 1H), 7.85 (m, 1H), 7.82 (m, 1H), 7.78 (d, J 7.2Hz, 1H), 7.73 (m, 2H),-14.31 (d, J 0.8Hz, 1H),-16.14 (d, J 0.8Hz, 1H). Data for 3: Anal. Calc. for C26H8N2O16Ru4S5: C, 26.72; H, 0.69; N, 2.40. Found: C, 27.08; H, 0.74; N, 2.48%. IR (nuCO, CH2Cl2): 2124w, 2102s, 2087vs, 2066vs, 2021vs cm-1. 1H NMR (CD2Cl2): delta 8.06 (m, 1H), 7.99 (d, J 7.2Hz, 1H), 7.90-7.76 (m, 6H). Data for 4: Anal. Calc. for C27H10N2O17Ru5S5: C, 24.95; H, 0.78; N, 2.15. Found: C, 25.28; H, 0.85; N, 2.24%. IR (nuCO, CH2Cl2): 2124s, 2093s, 2066vs, 2041s, 2016s, 1958w cm-1. 1H NMR (CD2Cl2): aromatic region, major isomer, delta 8.13 (d, J 7.2Hz, 1H), 7.93-7.74 (m, 7H); hydride region, major isomer, delta-13.67 (d, J 2.0Hz, 1H),-15.55 (d, J 2.0Hz, 1H), minor isomer, delta-13.78 (d, J 2.0Hz, 1H),-16.07 (d, J 2.0Hz, 1H). Major/minor=21:1.

27148-03-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,27148-03-4 ,Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Mia, Md. Jadu; Reza, Md. Selim; Bhoumik, Nikhil C.; Ghosh, Shishir; Nesterov, Vladimir N.; Richmond, Michael G.; Kabir, Shariff E.; Journal of Organometallic Chemistry; vol. 906; (2020);,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

7716-66-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Chlorobenzo[d]isothiazole, cas is 7716-66-7,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 1 3-(1-Piperazinyl)-1,2-benzisothiazole STR26 A mixture of 3-chloro-1,2-benzisothiazole (37.8 g., 0.235 mole) and piperazine (304.2 g., 3.53 mole) is heated under an argon atmosphere for a period of 20 hr. at 120 C. in a closed reactor. The reaction mixture is dissolved in 2 liters of water and the aqueous solution repeatedly extracted with methylene chloride. Extracts are combined, dried over magnesium sulfate and concentrated in vacuo. Residual material is taken up in ether, filtered and concentrated in vacuo to afford 24.4 g. (47%) of 3-(1-piperazinyl)-1,2-benzisothiazole free base as a viscous oil. A sample of the free base converted to the hydrochloride salt in ether with ethanolic hydrogen chloride and crytallized from methanol-ethanol affords analytically pure 3-(1-piperazinyl)-1,2-benzisothiazole hydrochloride, m.p. 280 C. (dec.). Anal. Calcd. for C11 H13 N3 S.HCl: C, 51.66; H, 5.52; N, 16.43. Found: C, 51.34; H, 5.46; N, 16.16.

The chemical industry reduces the impact on the environment during synthesis,7716-66-7,3-Chlorobenzo[d]isothiazole,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Mead Johnson & Company; US4411901; (1983); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is Isothiazole-4-carboxylic acid, and cas is 822-82-2, its synthesis route is as follows.

A solution of isothiazole-4- carboxylic acid (1 g, 1.1 A mmol) in CH2Cl2 (15 niL) and DMF (0.060 mL, 0.774 mmol) was cooled to 0 0C, and oxalyl chloride (0.813 mL, 9.29 mmol) was added dropwise over 10 min. The reaction mixture was warmed to RT and stirred for 1 h. The resulting acid chloride solution was added to a cooled solution of N-methoxy-N-methyl-amine hydrochloride and K2CO3 (4.82 g, 34.8 mmol) in 10 mL water. The mixture was stirred at rt overnight and then extracted twice with EtOAc. The combined organic layers were washed with brine, dried over anhydrous Na2SO4, filtered, and concentrated to yield N-methoxy-iV-methyl-isothiazole^-carboxamide. 1H NMR (400 MHz, CDCl3): delta 9.25 (s, IH), 8.93 (s, IH), 3.66 (s, 3H), 3.36 (s, 3H).

822-82-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,822-82-2 ,Isothiazole-4-carboxylic acid, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; MERCK SHARP & DOHME CORP.; GUO, Liangqin; LIU, Jian; NARGUND, Ravi, P.; PASTERNAK, Alexander; YANG, Lihu; YE, Zhixiong; WO2010/51177; (2010); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

288-16-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Isothiazole, cas is 288-16-4,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

To a solution of isothiazole (5.0 g, 58.82 mmol) in AcOH (37 mL) was added Br2 (12.5 g, 78.12 mmol) dropwise at 95 oC over 20 min and the mixture was stirred for 6 h at 95 oC, then cooled to RT, and poured into ice water (100 mL). The resulting mixture was extracted with Et2O (200 mL x 2). The organic phases were washed with 6N NaOH to pH at 7~8, dried over anhydrous Na2SO4 and filtered. The filtrate was concentrated in vacuo, and the resulting residue was purified by distillation to afford 4-bromoisothiazole as a white solid (1.5 g, 15%).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Isothiazole, 288-16-4

Reference£º
Patent; LYSOSOMAL THERAPEUTICS INC.; SKERLJ, Renato, T.; BOURQUE, Elyse Marie Josee; LANSBURY, Peter, T.; GREENLEE, William, J.; GOOD, Andrew, C.; (309 pag.)WO2017/176961; (2017); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

10271-85-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Isothiazole-5-carboxylic acid, cas is 10271-85-9,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

To a stirred solution isothiazole-5-carboxylic acid 46 (1.75 g, 13.56 mmol) in CH2Cl2 (50 mL) under inert atmosphere were added N, O-dimethylhydroxylamine (1.45 g, 14.92 mmol), EDCI.HCl (2.85 g, 14.92 mmol), DMAP (1.66 g, 13.56 mmol) and N-methylmorpholine (4.1 mL, 40.69 mmol) at 0 oC, followed by warming to room temperature and stirring for 16 h. The reaction was monitored by TLC. After completion of the reaction, the reaction mixture was poured into ice-cold water, extracted with CH2Cl2. The combined organic extracts were dried over sodium sulfate, filtered and concentrated in vacuo to obtain the crude. The crude was purified through silica gel column chromatography using 2% MeOH/ CH2Cl2 to afford compound 47 (1.2 g, 52%) as brown syrup. TLC: 5% MeOH/ CH2Cl2 (Rf: 0.2); 1H NMR (400 MHz, DMSO-d6): delta 8.64 (d, J = 1.8 Hz, 1H), 7.96 (d, J = 1.8 Hz, 1H), 3.82 (s, 3H), 3.33 (s, 3H); LCMS Calculated for C6H8N2O2S: 172.03; Observed: 173.1 (M+1)+.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Isothiazole-5-carboxylic acid, 10271-85-9

Reference£º
Patent; ASSEMBLY BIOSCIENCES, INC.; TURNER, William, W., Jr.; LI, Leping; HAYDAR, Simon, Nicolas; BURES, Mark, G.; RAI, Roopa; FRANCIS, Samson; ARNOLD, Lee, Daniel; (0 pag.)WO2018/160878; (2018); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is Isothiazole-4-carboxylic acid, and cas is 822-82-2, its synthesis route is as follows.

To a solution of l-[4-[methyl(tetrahydropyran-4-yl)amino]-5-oxido-6,7-dihydro- thieno[3,2-d]pyrimidin-5-ium-2-yl]azetidin-3-ol (5.0 mg, 15 muiotatauiotaomicronIota) in DCE (0.2 mL) was added solutions of 4-isothiazolecarboxylic acid (3.6 mg in 0.2 mL DCE, 28 muiotatauiotaomicronIota), DMAP (3.4 mg in 0.1 mL DCE, 28 muiotatauiotaomicronIota) and EDAC (5.3 mg in 0.2 mL DCE, 28 muiotatauiotaomicronIota) . The mixture was shaken at 50 C for 1 hour before it was concentrated in vacuo. Prep HPLC purification (acidic) afforded the title compound. 1H NMR (DMSO-d6) delta: 9.81 (s, 1H), 9.00 (s, 1H), 5.53 – 5.44 (m, 1H), 4.93 – 4.79 (m, 1H), 4.48 (dd, J = 10.4, 6.7 Hz, 2H), 4.16 (dd, J = 10.7, 3.8 Hz, 2H), 4.01 – 3.93 (m, 2H), 3.53 – 3.45 (m, 1H), 3.43 – 3.37 (m, 2H), 3.25 – 3.20 (m, 1H), 3.19 (s, 3H), 3.10 – 2.97 (m, 2H), 1.92 – 1.79 (m, 2H), 1.69 – 1.54 (m, 2H).HPLC-Retention time (XE Metode 7 CM) : 1.88 minutes.Detected “M + l”-mass: 450.12.

822-82-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,822-82-2 ,Isothiazole-4-carboxylic acid, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; LEO PHARMA A/S; LARSEN, Jens; (110 pag.)WO2019/57806; (2019); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

677304-75-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6-Bromobenzo[d]isothiazole-3-carboxylic acid, cas is 677304-75-5,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

Step 5; Sulfuryl dichloride (86.7 mg, 728 mumol) is added to a solution of6-bromobenzo[d]-isothiazole-3-carboxylic acid (188 mg, 728 mumol). The reaction mixture is stirred for 30 min before removing the volatiles by rotovap. The residue is taken up in CH2Cl2 (0.587 ml) and a solution of 2-prorhoylamine (62.5 muL, 728 mumol) and triethylamine (101 mul, 728 mumol) in CHjCl2 (1.2 ml) is added. The reaction mixture is stirred at room temperature until LC/MS analysis indicates complete conversion to the desired product. The reaction mixture is diluted with distilled water and ethyl acetate. The layers are separated and the aqueous is extracted with ethyl acetate. The combined organics are washed with brine and dried over Na2SO4, filtered and concentrated to give 6-bromo-N-isopropylbenzo[d]isothiazole- 3-carboxamide.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 677304-75-5, 6-Bromobenzo[d]isothiazole-3-carboxylic acid

Reference£º
Patent; AMGEN INC.; MEMORY PHARMACEUTICALS CORPORATION; WO2007/100880; (2007); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

7716-66-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Chlorobenzo[d]isothiazole, cas is 7716-66-7,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

Preparation 1 SYNTHESIS OF 3-PIPERAZIN-1-YLBENZO[D]ISOTHIAZOLE A mixture of anhydrous piperazine (2.75 g, 32 mmol) and 3-chlorobenzo[d]isothiazole (1.00 g, 5.80 mmol) were heated in a sealed tube in an oil bath at 125¡ã C. for 24 hours. The orange melt was then quenched with ice water and 50percent NaOH was added in one portion. The mixture was extracted with dichloromethane to get the crude product which was purified by recrystallization to afford the title compound as a pale yellow solid in 24percent yield (0.260 g). MS (ES+) m/z 220 (M+1).

The chemical industry reduces the impact on the environment during synthesis,7716-66-7,3-Chlorobenzo[d]isothiazole,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; XENON PHARMACEUTICALS INC.; US2008/125434; (2008); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com