Heterocyclic Building Blocks-Isothiazole

As a common heterocyclic compound, it belongs to isothiazole compound, name is 3-Bromoisothiazole, and cas is 55512-82-8, its synthesis route is as follows.

Intermediate 123d was reacted with 3-bromoisothiazole in a method analogous to Example 122 to give Example 123 (5.9 mg, 11.5 muiotaetaomicron, 46percent). LC-MS (Method Al) RT = 1.39 min, MS (ESI) m/z: 512.4 (M+H)+. H NMR (500 MHz, DMSO-cfe) delta 9.18 (d, 7=4.6 Hz, 1H), 8.12 (br d, 7=7.9 Hz, 1H), 8.09 – 8.01 (m, 2H), 7.75 (br d, 7=7.9 Hz, 1H), 7.17 (br d, 7=7.9 Hz, 2H), 7.07 (br d, 7=7.9 Hz, 2H), 4.68 (s, 2H), 2.32 (t, 7=7.6 Hz, 2H), 1.90 – 1.77 (m, 6H), 1.67 (br d, 7=6.7 Hz, 2H), 1.49 (quin, 7=7.5 Hz, 2H), 1.27 (dq, 7=14.9, 7.4 Hz, 2H), 0.81 (t, 7=7.3 Hz, 3H) (1 exchangeable proton not observed).

55512-82-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,55512-82-8 ,3-Bromoisothiazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; UNIVERSITE DE MONTREAL; BRISTOL-MYERS SQUIBB COMPANY; PRIESTLEY, Eldon, Scott; REZNIK, Samuel, Kaye; RUEDIGER, Edward, H.; GILLARD, James, R.; HALPERN, Oz, Scott; JIANG, Wen; RICHTER, Jeremy; RUEL, Rejean; TRIPATHY, Sasmita; YANG, Wu; ZHANG, Xiaojun; (642 pag.)WO2018/5591; (2018); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

18480-53-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3,4-Dichloroisothiazole-5-carboxylic acid, cas is 18480-53-0,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

(3,4-dichloroisothiazol-5-yl)methanolA solution of 3,4-dichloroisothiazole-5-carboxylic acid (2.0 g), N1N- dimethylformamide (few drops) and thionyl chloride (20 mL) in toluene (60 mL) was heated at 1000C for 16 hours. The reaction mixture was cooled to room temperature and concentrated under reduced pressure. The residue was dissolved in tetrahydrofuran (20 mL), cooled to -200C under a nitrogen atmosphere and treated dropwise with a 1.0 M sodium borohydride solution in N, N- dimethylformamide (8.5 ml.) over 1 hour. The mixture was stirred for 5 minutes after the end of addition and quenched with 1.0 M aqueous hydrochloric acid solution. The mixture was concentrated to low bulk under reduced pressure and extracted with ethyl acetate. The combined organic layer was washed with brine, dried over magnesium sulfate and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel, eluting with a mixture of cyclohexane and dichloromethane (1 :0 to 0:1 by volume), to afford the title compound as a pale yellow solid (1.1 g).1H NMR (300 MHz, CDCI3): delta 2.60 (s, 1H); 4.96 (s, 2H).

The chemical industry reduces the impact on the environment during synthesis,18480-53-0,3,4-Dichloroisothiazole-5-carboxylic acid,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; PULMAGEN THERAPEUTICS (ASTHMA) LIMITED; HYND, George; MONTANA, John Gary; FINCH, Harry; ARIENZO, Rosa; AHMED, Shahadat; WO2010/142934; (2010); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

24340-77-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4-Bromoisothiazole, cas is 24340-77-0,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

Intermediate 58: Methyl 6-(benzenesulphonylmethyl)-3-(isothiazol-4-yl)-2-methoxybenzoate[0588] A mixture of methyl 6-(benzenesulphonylmethyl)-2-methoxy-3-(4,4,5,5- tetramethyl-l,3,2-dioxaborolan-2-yl)benzoate (Intermediate 59, 0.15g), tri-tert-butyl- phosphinium tetrafluoroborate (O.Olg), cesium carbonate (0.34g), tris-(dibenzylideneacetone)- dipalladium (0.016g), and 4-bromoisothiazole (0.06g) in dioxane (3.2ml) and water (0.4ml) was degassed and then heated in the microwave at 120C for 20 minutes. After cooling, the mixture was diluted with ether, dried (MgS04) and filtered. The filtrate was evaporated to dryness and the residue was purified by chromatography on silica, eluting with a mixture of ethyl acetate and cyclohexane with a gradient of 0-60% to give crude methyl 6- (benzenesulphonylmethyl)-3-(isothiazol-4-yl)-2-methoxy-benzoate (0..044g) as an oil. The material was used without further purification or characterisation.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4-Bromoisothiazole, 24340-77-0

Reference£º
Patent; ZAFGEN CORPORATION; DYKE, Hazel, Joan; CRAMP, Susan, Mary; PALLIN, Thomas, David; KULAGOWSKI, Janusz, Jozef; MONTANA, John, Gary; ZAHLER, Robert; WO2011/44506; (2011); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

18480-53-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3,4-Dichloroisothiazole-5-carboxylic acid, cas is 18480-53-0,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

A mixture of 3,4-dichloroisothiazole-5-carboxylic acid (2.0 g) and toluene (20 mL) was treated with thionyl chloride (5.0 ml_) and lambda/,lambda/-dimethylformamide (0.5 mL), and the resulting mixture was heated at 1000C for 16 hours. The mixture was concentrated under reduced pressure and the residue was dissolved in tetrahydrofuran (5.0 mL). The mixture was cooled to -780C and treated dropwise over a period of 1 hour with a 2.0 M solution of sodium borohydride in lambda/,lambda/-dimethylformamide (8.5 mL). The mixture was stirred at – 780C for 5 minutes, diluted with 1.0 M aqueous hydrochloric acid solution and extracted with ethyl acetate. The combined organic extract was washed with saturated aqueous sodium chloride solution, dried over sodium sulfate and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel, eluting with a mixture of cyclohexane and dichloromethane (1:0 to 0:1 by volume) to afford the title compound as a pale yellow solid (1.1 g).1H NMR (CDCI3): delta 4.96 (s, 2H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3,4-Dichloroisothiazole-5-carboxylic acid, 18480-53-0

Reference£º
Patent; ARGENTA DISCOVERY LIMITED; WO2009/77728; (2009); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 27148-03-4, its synthesis route is as follows.

A solution of Htsac (0.035 g, 0.18 mmol) in MeOH was added toa solution of 1 (0.10 g, 0.18 mmol) in CHCl3 (10 cm3). The mixturewas stirred for 2 h and the resulting pale brown solid was collectedand dried in vacuum. Yield 0.116 g, 90%. Anal. Calc. for C25H28ClN3-O2Pd2S2: C, 42.0, H, 4.0, N, 5.9. Found: C, 42.2, H, 4.0, N, 5.7. Molarconductivity (DMSO): 0.30 (X-1 mol1 cm1). IR: 3083w, 2916w,1558 m, 1453vs, 1317 s, 1168 s, 1020 s, 815 s, 449w, 362 s cm1.1H NMR (DMSO d6): d 8.12-8.10 (dd, J 7.2, 1.2 2H, Ph), 7.97-7.95(m, 1H, Ph), 7.84-7.82 (m, 2H, Ph), 7.60 (d, J 7.2, 1H, Ph), 7.47 (d, J 7.2, 1H, Ph), 7.05-6.91 (m, 5H, Ph), 6.82 (d, J 7.2, 1H, Ph), 4.02(s, 4H, CH2), 2.72 (s, 12H, 4CH3). Mp: 202-204 C.

27148-03-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,27148-03-4 ,Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Al-Jibori, Subhi A.; Hameed, Wisam J.; Al-Janabi, Ahmed S.; Basak-Modi, Sucharita; Wagner, Christoph; Hogarth, Graeme; Inorganica Chimica Acta; vol. 479; (2018); p. 197 – 202;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

7716-66-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Chlorobenzo[d]isothiazole, cas is 7716-66-7,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

Synthesis of 5-Bromo-3-chlorobenzo[d]isothiazole. 3-Chlorobenzo[d]isothiazole (10 g, 59.0 mmol) was added to a solution of bromine (3.2 mL, 62.0 mmol) and silver sulfate (19.6 g, 63.0 mmol) in sulfuric acid (200 mL). The resulting brown mixture was allowed to stir at room temperature for 2h under nitrogen. The color slowly faded to pale yellow as a white precipitate formed. The precipitate was collected by vacuum filtration and triturated with hexanes to yield 5-bromo-3-chlorobenzo[d]isothiazole as a white solid (3.8 g). 1H NMR (300 MHz, CDCl3): 8.18 (s, IH), 7.8 (d, IH), 7.64 ppm (d, IH).; 3-Chlorobenzo[d]isothiazole (10 g, 59.0 mmol) was added to a solution of bromine (3.2 mL, 62.0 mmol) and silver sulfate (19.6 g, 63.0 mmol) in sulfuric acid (200 mL). The resulting brown mixture was allowed to stir at room temperature for 2h under nitrogen. The color slowly faded to pale yellow as a white precipitate formed. The precipitate was collected by vacuum filtration and triturated with hexanes to yield 5-bromo-3-chlorobenzo[d]isothiazole as a white solid (3.8 g). 1H NMR (300 MHz, CDCl3): 8.18 (s, IH), 7.8 (d, IH), 7.64 ppm (d, IH).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3-Chlorobenzo[d]isothiazole, 7716-66-7

Reference£º
Patent; RIGEL PHARMACEUTICALS, INC.; WO2006/91858; (2006); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is 3-Piperazinobenzisothiazole hydrochloride, and cas is 87691-88-1, its synthesis route is as follows.

A mixture of the product from step C above (5.0016 g, 17.476 mmol), 3-piperazin-1-yl-benzo[d]isothiazole hydrochloride (4.4811 g, 17.520 mmol), potassium carbonate (4.8299 g, 34.946 mmol) and potassium iodine (0.2903 g, 1.749 mmol) were reacted in acetonitrile (29.0 mL) in a CEM MARS5 microwave reactor for 1 h at 200 C. The reaction was cooled to room temperature, diluted with H2O and filtered. The solid was washed with H2O and hexanes. The resulting solid was purified by MPLC [silica gel, 100 % methylene chloride (CH2CI2) to 3 % MeOH/CH2CI2 over 1 h, then hold at 3 % MeOH/CH2CI2] to give 5.6591 g, (12.065 mmol, 69 %) of the titled compound as an off-white crystalline solid. LC-MS (APCI): (M-1)+ = 469.1, (M+1)+ = 471.0

87691-88-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,87691-88-1 ,3-Piperazinobenzisothiazole hydrochloride, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC; WO2004/26864; (2004); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is 3-Piperazinobenzisothiazole hydrochloride, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 87691-88-1, its synthesis route is as follows.

The above intermediate IV (0.01 mol) and the hydrochloride salt of the piperazine compound (V) (0.01 mol) were dissolved in DMF (100 mL), and K2CO3 (0.02 mol) was added.According to the general operation three,Preparation of 3-(4-(3-(6-fluoro-1H-indol-3-yl)propyl)piperazin-1-yl)benzo[d]isothiazole(VI-11) hydrochloride (white solid) 3.44 g, yield 80%.

87691-88-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,87691-88-1 ,3-Piperazinobenzisothiazole hydrochloride, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Shanghai Pharmaceutical Industry Institute; China Pharmaceutical Industry Zongyuan; Li Jianqi; Gu Zhengsong; Zhou Ainan; Xiao Ying; (26 pag.)CN109467554; (2019); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is 3-Piperazinobenzisothiazole hydrochloride, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 87691-88-1, its synthesis route is as follows.

The above intermediate IV (0.01 mol) and the hydrochloride salt of the piperazine compound (V) (0.01 mol)Dissolved in DMF (100 mL) and added K2CO3 (0.02 mol).According to the general operation three,Preparation of 3-(4-(3-(5-fluoro-1H-indol-3-yl)propyl)piperazin-1-yl)benzo[d]isothiazole (VI-2)The hydrochloride (white solid) was 3.44 g, yield 80%.

87691-88-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,87691-88-1 ,3-Piperazinobenzisothiazole hydrochloride, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Shanghai Pharmaceutical Industry Institute; China Pharmaceutical Industry Zongyuan; Li Jianqi; Gu Zhengsong; Zhou Ainan; Xiao Ying; (26 pag.)CN109467554; (2019); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

It is a common heterocyclic compound, the isothiazole compound, Sodium 3-oxido-5-sulfidoisothiazole-4-carboxylate, cas is 76857-14-2 its synthesis route is as follows.

4-carboxy-5-mercapto-3-hydroxy-isothiazolium trisodium (5) (24.31 g, 0.10 mol) was added to a solution of(About 65ml) hydrochloric acid stirring, the pH to 2-3, by adding 297mgDMAPStirring was continued for 20 minutes,Followed by addition of 50 ml of tert-butanol,6 ml of pyridine, Boc2O (21.83 g, 0.10 mol),In a dry environmentThe reaction was stirred at room temperature for 18 h. The reaction was complete by HPLC and the solvent was removed by rotary evaporation to give an oil which was chromatographed on ethyl acetate, The organic layer was dried over anhydrous magnesium sulfate, concentrated, and recrystallized from ethanol to give Intermediate 6 (24.11 g) in a molar yield87%, HPLC purity 99.2%.

76857-14-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,76857-14-2 ,Sodium 3-oxido-5-sulfidoisothiazole-4-carboxylate, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Shandong Luoxin Pharmaceutical Group Co Ltd; Sun, Song; Xu, Qinyan; Chang, Zhicheng; (7 pag.)CN105646544; (2016); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com