Heterocyclic Building Blocks-Isothiazole

It is a common heterocyclic compound, the isothiazole compound, Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, cas is 27148-03-4 its synthesis route is as follows.

A CH2Cl2 solution (20mL) of [Ru3(CO)12] (100mg, 0.16mmol) and tsacH (63mg, 0.32mmol) was heated to reflux for 8h during which time the color of the solution changed from yellow to deep red. The reaction mixture was then allowed to cool at room temperature, and the solvent was removed under reduced pressure. The residue was separated by TLC on silica gel using a binary eluent composed of n-hexane/CH2Cl2 (v/v, 1:1), yielding a single yellow band corresponding to [Ru2(CO)6(mu-N,S-tsac)2] (1). The product was recrystallized from n-hexane/CH2Cl2 at 4C and furnished orange crystals of analytically pure 1 in 12% yield (14mg). Data for 1: Anal. Calc. for C20H8N2O10Ru2S4: C, 31.33; H, 1.05; N, 3.65. Found: C, 31.64; H, 1.12; N, 3.69%. IR (nuCO, CH2Cl2): 2102s, 2075vs, 2032sh, 2027s, 1961w cm-1. 1H NMR (CDCl3): delta 8.01 (d, J 7.2Hz, 2H), 7.88 (d, J 7.2Hz, 2H), 7.78 (t, J 7.2Hz, 2H), 7.73 (t, J 7.2Hz, 2H).

27148-03-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,27148-03-4 ,Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Mia, Md. Jadu; Reza, Md. Selim; Bhoumik, Nikhil C.; Ghosh, Shishir; Nesterov, Vladimir N.; Richmond, Michael G.; Kabir, Shariff E.; Journal of Organometallic Chemistry; vol. 906; (2020);,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

936-16-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, cas is 936-16-3,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Potassium carbonate was dissolved in DMF, and 1,2-bezeneisothiazolin-1,1-dioxide (8) (1 equiv.) in dichloromethanewas added to the reaction solution, and stirred for overnight. Then,the reaction mixture was filtered through Celite, and washed with1 N HCl and saturated sodium hydrogen carbonate solution. Residualsolution was dried over magnesium sulfate, and concentratedin vacuo, and purified by column chromatography to afford the titlecompound.

The chemical industry reduces the impact on the environment during synthesis,936-16-3,2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide,I believe this compound will play a more active role in future production and life.

Reference£º
Article in Press; Hong, Jin Ri; Choi, Young Jin; Keum, Gyochang; Nam, Ghilsoo; Bioorganic and Medicinal Chemistry; (2017);,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

27148-03-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, cas is 27148-03-4,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

General procedure: For 6: A solution of thiosaccharin (tsacH) (0.06 g, 0.307 mmol) in chloroform (8 cm3) was added to a solution of [PtCl2(kappa2-dppm)] (0.10 g, 0.154 mmol) in chloroform (10 cm3). A few drops of triethylamine were added and the resulting mixture was heated under reflex for 1 h. This produced a yellow solution was filtered off and reduced to half volume. Methanol (2 cm3) was added and the mixture was set a side to evaporate slowly at room temperature. The yellow crystalline solid thus formed was filtered off and dried in a vacuum oven (0.12 g, 91%).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 27148-03-4, Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide

Reference£º
Article; Al-Jibori, Subhi A.; Al-Jibori, Mohamed H.S.; Hogarth, Graeme; Inorganica Chimica Acta; vol. 398; (2013); p. 117 – 123;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is 3-Chlorobenzo[d]isothiazole, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 7716-66-7, its synthesis route is as follows.

EXAMPLE B4 A mixture of 3,4-dihydro-7-methoxybenzofuro[2,3-c]pyridine-2(1H)-butanamine (0.0055 mol), 3-chloro-1,2-benzisothiazole (0.0089 mol) and NaHCO3 (0.01 mol) was stirred for 1.5 hour at 120¡ã C. (melt). 1-Butanol (0.5 ml) was added. The reaction mixture was cooled, then dissolved in CH2Cl2 and purified by column chromatography over silica gel (eluent: CH2Cl2/(CH3OH/NH3) 98/2). The desired fractions were collected and the solvent was evaporated. The residue was dissolved in 2-propanone and converted into the hydrochloric acid salt (1:2) with HCl/2-propanol. The mixture was stirred at room temperature. The precipitate was filtered off and dried, yielding 1.60 g of N-(1,2-benzisothiazol-3-yl)-3,4-dihydro-7-methoxybenzofuro[2,3-c]pyridine-2(1H)-butanamine monohydrochloride monohydrate (61percent) (compound 55).

7716-66-7, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7716-66-7 ,3-Chlorobenzo[d]isothiazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Janssen Pharmaceutica N.V.; US6495555; (2002); B1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is 3-Chlorobenzo[d]isothiazole, and cas is 7716-66-7, its synthesis route is as follows.

a) A mixture of 32 parts of ethyl 1-piperazinecarboxylate, 17 parts of 3-chloro-1,2-benzisothiazole and 45 parts of N , N -dimethylacetamide was stirred for 0.5 hour at 150¡ãC. After cooling to 50¡ãC, the reaction mixture was poured into ice water. The aqueous layer was decanted and the oily layer was stirred again in water. The product from the oily layer was extracted with trichloromethane. The extract was dried, filtered and evaporated. The residue was purified by column chromatography over silica gel using a mixture of trichloromethane and methanol (95:5 by volume) as eluent. The pure fractions were collected and the eluent was evaporated, yielding 13 parts (44percent) of ethyl 4-(1,2-benzisothiazol-3-yl)-1-piperazinecarboxylate as a residue (interm. 12).

7716-66-7, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7716-66-7 ,3-Chlorobenzo[d]isothiazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; EP398425; (1990); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

18480-53-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3,4-Dichloroisothiazole-5-carboxylic acid, cas is 18480-53-0,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

1.1. Synthesis of 3,4-dichloro-N-(cyclohexylmethyl)isothiazole-5-carboxamide: 730 mg of 3,4-dichloroisothiazole-5-carboxylic acid (3.7 mmol) were dissolved in 10 ml of dichloromethane and a drop of dimethylformamide was added. 1.4 g of oxalyl chloride (11.1 – – mmol) were added dropwise at room temperature. After stirring for 1 h at room temperature, the solution was evaporated to dryness on a rotary evaporator. The residue was taken up in 3 ml of dichloromethane and slowly added dropwise to a solution of 626 mg of 1 – cyclohexylmethanamine (5.5 mmol) and 746 mg of triethylamine (7.4 mmol) in 10 ml of dichloromethane. The mixture was stirred at room temperature for 1 h. The reaction mixture was then added to water and extracted repeatedly with dichloromethane. The concentrated extracts were dried over MgS04, concentrated and purified by column chromatography. Yield: 1.05 g (97percent of theory).’H-NMR (400 MHz, CDC13delta, ppm) 6.86 (br,lH), 3.34 (tr,2H), 1.77 (m,4H), 1.66 (m,lH), 1.58 (m,lH), 1.3-1.15 (m,3H), 1.0 (m,2H).

The chemical industry reduces the impact on the environment during synthesis,18480-53-0,3,4-Dichloroisothiazole-5-carboxylic acid,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; BAYER CROPSCIENCE AKTIENGESELLSCHAFT; TIEBES, Joerg; MOSRIN, Marc; REY, Jullien; DOeLLER, Uwe; DROeGE, Thomas; MAECHLING, Simon; SCHMIDT, Jan Peter; TELSER, Joachim; SCHMUTZLER, Dirk; DIETRICH, Hansjoerg; GATZWEILER, Elmar; ROSINGER, Christopher Hugh; BERNIER, David; CRISTAU, Pierre; TSUCHIYA, Tomoki; (180 pag.)WO2016/102420; (2016); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

87691-88-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Piperazinobenzisothiazole hydrochloride, cas is 87691-88-1,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

To a flask equipped with mechanical stirrer, thermometer, condenser and nitrogen inlet was added 6-chloro-5-(2-chloroethyl)-l,3-dihydro-2H-indol-2- one (21.6 g, 94 mmol), 3-(l-piperazinyl)-l,2-benzoisothiazole hydrochloride (24 g, 94 mmol), sodium carbonate (29.9 g, 282 mmol) and l-methyl-2- pyrrolidinone (NMP) (96 ml) and the mixture was heated to 130-1350C under nitrogen for about 24 hrs. The mixture was cooled to 40-450C and poured into water. The suspension was cooled and the product was collected by filtration on a Buchner funnel, the filter cake was rinsed with water at 20- 250C and the damp product was transferred to a drying oven and dried in vacuo. This afforded 34.2 g (88.2% yield) of crude ziprasidone. The IR (KBr) and NMR spectra were consistent with those of reference ziprasidone.

The chemical industry reduces the impact on the environment during synthesis,87691-88-1,3-Piperazinobenzisothiazole hydrochloride,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; APOTEX PHARMACHEM INC.; WO2006/47893; (2006); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

87691-88-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Piperazinobenzisothiazole hydrochloride, cas is 87691-88-1,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

N-[4-(2-BROMO-ETHYL)-2-FLUORO-PHENYL]-ACETAMIDE (0.2609 g, 1.00 mmol), 3-piperazin-1-yl-benzo [AGISOTHIAZOLE HYDROCHLORIDE (0.3887 g, 1.52 mmol), potassium carbonate (0.2109 g, 1.53 mmol), potassium iodide (0.1662 g, 1.00 MMOL) and acetonitrile (5.0 mL) were added to a Smith microwave reaction tube containing a magnetic stir bar and then crimped shut. The reaction was run on a Smith Personal Chemistry microwave at 140 C for 0.5 h. After removing the crimped septum, the contents were transferred to a separatory funnel with water (10 mL) and extracted with methylene chloride (2 x 40 mL). The combined organic extracts were dried over anhydrous sodium sulfate, filtered and concentrated to give an oily residue. Purification by MPLC on a 40M silica gel cartridge using a linear gradient over 1 h of 0-3% methanol in methylene chloride provided 0.1230 g (0.309 MMOL) of the product as an off-white solid after drying in vacuo. Several fractions containing product and a by-product (0.1487 g total) were discarded. Yield : 31% ; MS (APCI) : 399.2 [M+H] + ; Anal. Calcd. For C2IH23FN40S’0. 25 H20 : C, 62.59 ; H, 5.88 ; N, 13.90. Found: C, 62.72 ; H, 5.53 ; N, 13.53.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3-Piperazinobenzisothiazole hydrochloride, 87691-88-1

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC; WO2004/41793; (2004); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

18480-53-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3,4-Dichloroisothiazole-5-carboxylic acid, cas is 18480-53-0,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

(To 4.0 g (20.3 mmol) of 3,4-dichloroisothiazole-5-carboxylic acid were added 8 ml of oxalyl chloride and a catalytic amount of N,N-dimethylformamide (DMF). The mixture was stirred at 50¡ãC for 30 minutes. The reaction mixture was concentrated under vacuum to obtain 3,4-dichloroisothiazole-5-carbonyl chloride.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3,4-Dichloroisothiazole-5-carboxylic acid, 18480-53-0

Reference£º
Patent; KUMIAI CHEMICAL INDUSTRY CO., LTD.; IHARA CHEMICAL INDUSTRY CO., LTD.; EP2039690; (2009); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

87691-88-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Piperazinobenzisothiazole hydrochloride, cas is 87691-88-1,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

A mixture of 8 (700 mg, 2.2 mmol), 9 (817 mg, 3.2 mmol), Nal (651 mg, 4.3 mmol), and triethylamine (1.5 mL, 10.9 mmol) in acetonitrile (50.0 mL), was heated to reflux for 48 h, and allowed to cool. The mixture was concentrated to dryness in vacuo. The residue was suspended in water (50 mL) and sonicated for 5 min, and then filtered through a sintered glass frit. The solid was rinsed with additional water, dried under vacuum, and purified by chromatography (silica gel, gradient 3 – 5 % MeOH in CH2CI2) to provide compound 10 (630 mg, 63 %) as a white solid. 1H NMR (400 MHz, CDCl3): delta 10.75 (br s, 1H), 7.93 (d, 1H), 7.80 (d, 1H), 7.50-7.43 (m, 1H), 7.40-7.35 (m, 1H), 7.29-7.22 (m, 1H), 7.10 (d, 1H), 6.98 (s, 1H), 4.10 (t, 2H), 3.61-3.52 (m, 4H), 3.15 (t, 2H), 3.00 (t, 2H), 2.80-2.72 (m, 4H), 2.70 (t, 2H), 2.29-2.20 (m, 2H), 2.10-2.02 (m, 2H), MS m/z 460.97 [C26H28N4O2S + H]+

The chemical industry reduces the impact on the environment during synthesis,87691-88-1,3-Piperazinobenzisothiazole hydrochloride,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC; WO2004/26864; (2004); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com