Month: April 2022

Heterocyclic compounds can be divided into two categories: alicyclic heterocycles and aromatic heterocycles. Compounds whose heterocycles in the molecular skeleton cannot reflect aromaticity are called alicyclic heterocyclic compounds. Compound: 17927-65-0, is researched, Molecular Al2H8O13S3, about Image analysis of floc size distribution induced by two different impellers, the main research direction is image analysis floc size distribution impeller water.HPLC of Formula: 17927-65-0.

The goal is to analyze the relation between characteristic floc size and hydrodynamics. The 1st question concerned the relation between an average floc size and the viscous dissipation of kinetic energy. A series of flocculation experiments was conducted in a mixing tank with 2 impellers (a Rushton turbine and a Lightnin A310 impeller) for equivalent dissipated power conditions. The average floc size depended on the global dissipation rate whatever the impeller type. However, the floc size distributions are significantly different for each impeller. This difference can be explained by the spatial distribution of the dissipation rate of the turbulent kinetic energy, which depends on impeller type. The 2nd question concerned the dependence of the floc size to the history of mixing. The flocculation experiments show that the floc size distributions was reproducible once the flocs had been submitted to the highest velocity gradient.

There are many compounds similar to this compound(17927-65-0)HPLC of Formula: 17927-65-0. if you want to know more, you can check out my other articles. I hope it will help you，maybe you’ll find some useful information.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

Synthetic Route of C10H16O4. Aromatic heterocyclic compounds can also be classified according to the number of heteroatoms contained in the heterocycle: single heteroatom, two heteroatoms, three heteroatoms and four heteroatoms. Compound: (1S,3R)-1,2,2-Trimethylcyclopentane-1,3-dicarboxylic acid, is researched, Molecular C10H16O4, CAS is 560-09-8, about A Tale of Three Carboxylates: Cooperative Asymmetric Crystallization of a Three-Dimensional Microporous Framework from Achiral Precursors. Author is Zhang, Jian; Chen, Shumei; Nieto, Ruben A.; Wu, Tao; Feng, Pingyun; Bu, Xianhui.

Sym. crystallization of 3D porous materials constructed entirely from achiral building blocks by using enantiopure organic acids or amino acids as chirality-inducing agents is reported. Thus, the presence of D-camphor led to (+)-Mn3(HCOO)4(adc) (adc = 1,3-adamantanedicarboxylate), while L-camphor resulted in (-)-Mn3(HCOO)4(adc), which were characterized by x-ray crystallog. The chiral induction agent is essential to initiate the nucleation of the chiral crystals. The chirality control seems to be achieved through cooperative binding between enantiopure chiral reagents and achiral structural building units. Enantiopure chiral reagents control the absolute chirality of the crystals by participating in the nucleation and crystallization processes, but are later replaced with achiral ligands in the resulting crystals.

There are many compounds similar to this compound(560-09-8)Synthetic Route of C10H16O4. if you want to know more, you can check out my other articles. I hope it will help you，maybe you’ll find some useful information.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic.Hurst, Derek T.; Beaumont, Claire; Jones, Derek T. E.; Kingsley, Deborah A.; Partridge, Julian D.; Rutherford, Trevor J. researched the compound: 2-Amino-6-methylpyrimidine-4-thiol( cas:6307-44-4 ).SDS of cas: 6307-44-4.They published the article 《The chemistry of pyrimidinethiols. II. The preparation and reactions of some 2-arenecarbonylmethylthiopyrimidines》 about this compound( cas:6307-44-4 ) in Australian Journal of Chemistry. Keywords: pyrimidinone phenacylthio; phenacylthiopyrimidinone. We’ll tell you more about this compound (cas:6307-44-4).

2-Pyrimidinethiones were treated with phenacyl halides to give (phenacylthio)pyrimidines I (R1= Ph, tolyl, halophenyl, anisyl, dimethyoxyphenyl, O2NC6H4, biphenyl, Cl2C6H3, naphthyl; R2 = Me, H, Ph, Pr, NH2). Some I were heated in Ph2O to give phenacylidenepyrimidinones II (R3 = Ph, tolyl, halophenyl, anisyl, dimethyoxyphenyl, O2NC6H4, biphenylyl, naphthyl; R4 = Me, H, Pr).

There are many compounds similar to this compound(6307-44-4)SDS of cas: 6307-44-4. if you want to know more, you can check out my other articles. I hope it will help you，maybe you’ll find some useful information.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

Quality Control of Aluminum(III) sulfate xhydrate. Aromatic compounds can be divided into two categories: single heterocycles and fused heterocycles. Compound: Aluminum(III) sulfate xhydrate, is researched, Molecular Al2H8O13S3, CAS is 17927-65-0, about Dielectric properties of calcium, zinc, magnesium, copper, aluminum, iron, manganese, nickel, and cobalt sulfates. Author is Sychev, M. M.; Shiballo, V. G.; Katushkin, V. P.; Ustinov, A. E..

The dielec. constant (κ) of various sulfate hydrates of Ca2+, Zn2+, Mg2+, Cu2+, Al3+, Fe2+, Mn2+, Ni2+, and Co2+ was studied in relation to the n (number of mols. of bound water); the κ increased with an increase in n. A rectilinear equation κ = α + n × tg β is derived, where α = κ of anhydrous salt and tg β = tangent of the angle of curve κ-n. The compressive strength of cement stones, containing these crystallohydrates, decreased with an increase in tg β of the salt.

I hope my short article helps more people learn about this compound(Aluminum(III) sulfate xhydrate)Quality Control of Aluminum(III) sulfate xhydrate. Apart from the compound(17927-65-0), you can read my other articles to know other related compounds.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

Product Details of 17927-65-0. The fused heterocycle is formed by combining a benzene ring with a single heterocycle, or two or more single heterocycles. Compound: Aluminum(III) sulfate xhydrate, is researched, Molecular Al2H8O13S3, CAS is 17927-65-0, about Large-scale synthesis of mullite nanowires by molten salt method. Author is Huo, Kaifu; Zhu, Boquan; Fu, Jijiang; Li, Xuedong; Chu, Paul K..

Single-crystalline mullite (3Al2O3·2SiO2) nanowires have been produced in large quantities by a low cost and environmentally benign molten salt synthesis (MSS) method. The raw materials, Al2(SO4)3 and SiO2 powders, react in molten Na2SO4 at 1000 °C to produce mullite nanowires without the use of surfactants or templates. After the synthesis, the remaining salts can be easily separated from the products by washing with water. The final products are characterized by X-ray powder diffraction, field emission SEM, transmission electron microscopy, energy-dispersive X-ray spectroscopy, selected-area electron diffraction, and inductively coupled plasma-at. emission spectrometry. The thermal and chem. behavior of the raw materials is investigated by heating at a rate of 10 °C/min up to 1200 °C in air followed by thermogravimetric and differential scanning calorimetry analyses. The single-crystalline mullite nanowires have diameters of 30-80 nm and lengths from several hundreds of nanometers to micrometers and the growth mechanism is discussed.

I hope my short article helps more people learn about this compound(Aluminum(III) sulfate xhydrate)Product Details of 17927-65-0. Apart from the compound(17927-65-0), you can read my other articles to know other related compounds.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

Beaudegnies, Renaud; Ghosez, Leon published an article about the compound: 2-(tert-Butyl)isothiazol-3(2H)-one 1,1-dioxide( cas:119639-24-6,SMILESS:O=C(C=C1)N(C(C)(C)C)S1(=O)=O ).Application In Synthesis of 2-(tert-Butyl)isothiazol-3(2H)-one 1,1-dioxide. Aromatic heterocyclic compounds can be classified according to the number of heteroatoms or the size of the ring. The authors also want to convey more information about this compound (cas:119639-24-6) through the article.

Chiral 1-azadienes I (R1, R2 = H, Me) derived from α,β-unsaturated aldehyde and Enders’ hydrazines cycloadd to cyclic dienophiles with high facial selectivities. The adducts can be readily converted into enantiomerically pure piperidine derivatives, e.g. II.

I hope my short article helps more people learn about this compound(2-(tert-Butyl)isothiazol-3(2H)-one 1,1-dioxide)Application In Synthesis of 2-(tert-Butyl)isothiazol-3(2H)-one 1,1-dioxide. Apart from the compound(119639-24-6), you can read my other articles to know other related compounds.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

The chemical properties of alicyclic heterocycles are similar to those of the corresponding chain compounds. Compound: Aluminum(III) sulfate xhydrate, is researched, Molecular Al2H8O13S3, CAS is 17927-65-0, about Prilling of aluminum sulfate hydrates, the main research direction is prilling aluminum sulfate; drop formation aluminum sulfate prilling; jet breakup aluminum sulfate prilling.SDS of cas: 17927-65-0.

A prilling technique was used to produce droplets of aluminum sulfate hydrates in the size range of 2-2.5mm. Production of spherical particles of aluminum sulfate hydrates by using a prilling technique has never been studied, nor carried out. The effects of the orifice geometry and hydrostatic head on drop formation were measured. The flow rates of hydrated aluminum sulfate melt through bores of 0.08 and 0.11 cm were measured for liquid heads of 10-100 cm. It was found that the break-up of a liquid jet produced particles in the size range 2.0-2.5 mm with a 0.8 mm orifice. The modified Meister and Scheele correlation, which is the first application on a high viscous fluid in air system, was found to be satisfactory for estimating the particle size obtained by the jet break-up mechanism.

I hope my short article helps more people learn about this compound(Aluminum(III) sulfate xhydrate)SDS of cas: 17927-65-0. Apart from the compound(17927-65-0), you can read my other articles to know other related compounds.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

In organic chemistry, atoms other than carbon and hydrogen are generally referred to as heteroatoms. The most common heteroatoms are nitrogen, oxygen and sulfur. Now I present to you an article called The polymorphism of organic compounds, published in 1961, which mentions a compound: 560-09-8, mainly applied to , Product Details of 560-09-8.

Observations were made of the polymorphic transformations of organic compounds on the stage of a polarizing microscope. The crystals were cooled to -165° and heated to 200°. Under normal pressure polymorphism could not be proved for several compounds Enantiotropic pseudotransition was exhibited by phenol at -2°, caused by impurities. 1-Methylcyclopentanol, phenol, cyclopentyl cyanide, Me3COH, and CHI3 showed no true polymorphism. MeCN was not enantiotropic. Glutaric acid, lauryl alc., chloral hydrate, Me2C(Et)OH, and succinonitrile were enantiotropic. Hydroquinone, malonitrile, and Me oxalate were dimorphic monotropes. d-Camphoric acid was a true monotrope. 55 references.

I hope my short article helps more people learn about this compound((1S,3R)-1,2,2-Trimethylcyclopentane-1,3-dicarboxylic acid)Product Details of 560-09-8. Apart from the compound(560-09-8), you can read my other articles to know other related compounds.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

In organic chemistry, atoms other than carbon and hydrogen are generally referred to as heteroatoms. The most common heteroatoms are nitrogen, oxygen and sulfur. Now I present to you an article called Pyrimidines. I. Synthesis of pyrimidinethiols, published in 1961, which mentions a compound: 6307-44-4, mainly applied to , Recommanded Product: 6307-44-4.

cf. CA 54, 6747a. The 9 previously unknown isomers of the 22 possible substituted pyrimidinethiols, containing H, HO, NH2, and SH as substituents were synthesized and methods for preparation of some of the previously reported compounds were improved. Various derivatives of RC:N.CR1:N.CR2:CH (I) were prepared for preliminary screening as antitumor agents. HOCH2CH2OH (200 ml.), 125 g. 4,5-Cl(MeS)C4H2N2, and 200 g. NaSH heated slowly to 100° with frothing and bubbling, the mixture carefully heated to 150° and kept 30 min., the solution poured into 1500 ml. H2O and the boiled, decolorized hot filtrate acidified with AcOH, the precipitate reprecipitated from hot dilute aqueous NH4OH with AcOH gave 85 g. I (R = H, R1 = R2 = SH), converted by concentrated HBr to I (R = R1 = H, R2 = SH). NaHS (42 g.) and 13 g. 4,6,2-Cl(HO)(MeS)C4HN2 in 120 ml. HOCH2CH2OH heated 30 min. at 150°, the cooled mixture poured into 500 ml. H2O and the boiled decolorized solution filtered, acidified with AcOH to pH 5 and the refiltered solution adjusted to pH 1.0 with dilute HCl, the product reprecipitated from solution in dilute NH4OH with HCl, and the product recrystallized from HCONMe2-H2O gave 9.0 g. I (R = OH, R1 = R2 = SH), m. 262-4° (method A). The appropriate chloropyrimidine (60 g.) in 500 ml. absolute alc. refluxed 3 hrs. with 150 g. NaHS, the chilled mixture filtered and the alc. washed precipitate boiled in 1 l. H2O, the decolorized solution filtered, the filtrate acidified and the precipitate recrystallized from the appropriate solvent gave RC:N.CR1: N.CR2:CR3 (II) (method B). In method C the procedure was the same but no precipitate was formed. The light yellow alc. solution was diluted with 1 l. boiling H2O and acidified and the precipitate recrystallized The appropriate chloropyrimidine (40 g.) and 40 g. (H2N)2CS in 500 ml. absolute alc refluxed 2 hrs. the mixture chilled and the precipitated ligroine-washed product purified by reprecipitation and recrystallization gave II (method D). The appropriate chloropyrimidine (35 g.) and 70 g. powd. NaHS in 400 ml. H2O was autoclaved 4 hrs. at 150°/8 atm., the solution boiled and the decolorized solution filtered, acidified with AcOH [for the preparation of I (R = NH2, R1 = SH, R2 = OH)] or dilute HCl [for the preparation of I (R = SH, R1 = R2 = OH)], and the products purified by recrystallization (method E). I (R = NH2, R1 = SH, R2 = OH) (50 g. finely powd. and dried at 100°) refluxed 2 hrs. with 150 g. P2S5 in 1.5 l. dry C5H5N, excess C5H5N evaporated in vacuo and the residue diluted cautiously with 750 ml. H2O, the mixture refluxed 2 hrs. on a steam bath with evolution of H2S, the chilled mixture filtered and adjusted to pH 2, the volume reduced to 33% in vacuo and the cooled concentrate filtered, the residue taken up in dilute NH4OH and the boiled decolorized solution filtered, acidified with dilute HCl and the precipitate recrystallized from HCONMe2-H2O gave 35 g. I (R = H2N, R1 = R2 = SH). Purified P2S5 (125 g.) and 52 g. I (R = R1 = H, R2 = OH) refluxed 1 hr. with stirring in l. C5H5N, the hot solution poured into 1 l. H2O and the solution heated on a steam bath 3 hrs., the filtered solution evaporated in vacuo to 200 ml., refrigerated and the H2O-washed product recrystallized from 500 ml. boiling H2O gave 42 g. I (R = R1 = H, R2 = SH). I(R = R2 = Cl, R1 = NH2) (33 g.) added to 1 l. 4:1 alc.-H2O containing 40 g. NaOH saturated with H2S, the mixture refluxed with stirring 2 hrs. with passage of H2S, treated with C and the filtered solution acidified with AcOH gave 42 g. I (R = SH, R1 = NH2, R2 = Cl), m. 302° (decomposition), λ 260 mμ (ε 9800, pH 1), λ 280 mμ (ε 12,500, pH 11), converted by autoclaving with NaHS to I (R = SH, R1 = R2 = OH). I (R = R2 = OH, R1 = SH)(60 g.)in 1 l. 2N NaOH stirred 3 hrs. with dropwise addition of 50 g. Me2SO4, the solution boiled with addition of C and the decolorized filtered solution acidified to pH 1.0 with HCl gave 50 g. I (R = R1 = OH, R1 = MeS) (III), m. above 360° (H2O). III (80 g.) refluxed 2 hrs. with 500 ml. POCl3, excess POCl3 removed in vacuo and the residue poured with stirring over crushed ice, the mixture stirred 20 min. at 0°, filtered and the precipitate washed in ice H2O until the pH of the washings was no longer below 5, the material dried 16 hrs. in vacuo and recrystallized from MeOH and H2O gave 64 g. I (R = R2 = Cl, R1 = MeS) (IV), m 43°. Treatment of IV with NaHS at 150° in HOCH2CH2OH gave I (R = R1 = R2 = SH). NaHS (75 g.) in 500 ml. MeOH at 50° stirred with portionwise addition of 50 g. IV, the mixture stirred 30 min. before dilution with 1 l. H2O, the solution boiled with C and the filtered solution acidified, the product reprecipitated from dilute NH4OH with AcOH, and recrystallized from HCONMe2-H2O gave 40 g. I (R = R2 = HS, R1 = MeS), m. above 360°. IV (50 g.) refluxed with stirring 4 hrs. in 500 ml. 2N NaOH, the solution decolorized and the filtered solution acidified with AcOH, the precipitate purified by reprecipitation and recrystallized from HCONMe2-H2O gave 40 g. I (R = Cl, R1 = MeS, R2 = OH), m. 208°. Absolute MeOH (150 ml.) at 0° treated with 30 g. finely powd. IV, the mixture stirred 45 min. with passage of dry Cl, filtered from 8 g. product, and the filtrate evaporated at 20° in a stream of dry air gave 12 g. product; the crops combined and recrystallized from EtOAc and C7H16 gave 17 g. I (R = R2 = Cl, R1 = MeSO2) (V), m. 119°. V (15 g.) warmed in 200 ml. N NaOH, the filtered solution chilled and the precipitate washed with cold H2O and alc., the dry salt (11.6 g.) in 150 ml. H2O carefully neutralized with HCl and the solution evaporated in vacuo, the residue taken up in boiling Me2CHOH and diluted with C7H16 gave 5 g. I (R = R2 = Cl, R1 = OH), m. 262° (Me2CHOHC7H16). The ultraviolet absorption spectra of the completed series of I showed the approx. maximum of the major peak of I in solutions at pH 1.0 were 280, 300-20, 320-40, and 360-70 mμ for 2-pyrimidinethiols, 4-pyrimidinethiols, 2,4-pyrimidinedithiols, and 4,6-pyrimidinedithiols, resp. Data for I and for a number of known thiopyrimidines, II, not previously published are recorded for comparison [R, R1, R2, R3, m.p. (solvents), and % yield given]: H, SH, H, H, 229-30° (alc.), 70; H, H, SH, H, 190-2° (H2O), 69; H, OH, SH, H, 298-300° (H2O-HCONMe2), 88; H, SH, OH, H, 310-12° (H2O), 73; H, NH2, SH, H, 231-3° (H2O-HCONMe2), 68; OH, H, SH, H, 247° (H2O), 79; H2N, H, SH, H, 306° (H2O-HCONMe2), 61; H, SH, SH, H, 300° (H2O), 70; HS, H, SH, H, 250-2° (H2O), 70; OH, SH, OH, H, above 360° (H2O-HCONMe2), 84; OH, OH, SH, H, 245° (H2O), 54; H2N, OH, SH, H, 355° (H2O-HCONMe2), 43; OH, H2N, SH, H, above 360° (H2O-HCONMe2), 82; H2N, H2N, SH, H, above 360° (reprecipitation), 50; H2N, SH, OH, H, above 360° (reprecipitation), 91; H2N, SH, H2N, H, above 360° (reprecipitation), 93; OH, SH, SH, H, 262-4° (H2O-HCONMe2), 79; H2N, SH, SH, H, above 360° (H2O-HCONMe2), 60; SH, OH, SH, H, 266-7° (H2O-HCONMe2), 46; SH, H2N, SH, H, 267° (H2O), 76; SH, SH, SH, H, above 360° (reprecipitation), 70; Cl, H2N, H, Cl, above 360° (reprecipitation), 63; Me, H2N, SH, H, 321° (reprecipitation), 84; Me, H2N, SH, Br, 207° (H2O-HCONMe2), 98; Me, SH, SH, H, above 360° (H2O-HCONMe2), 70; H, SH, SH, CO2H, 261-3° (H2O-HCONMe2), 63; SH, H, SH, Cl, 215-17° (reprecipitation), 70; SH, H, SH, Br, 213° (reprecipitation), 92; SH, H2N, SH, Ph, 266-8° (H2O-HCONMe2), 60; H, MeS, SH, H, 203° (H2O-HCONMe2), 96; Me, MeS, SH, H, 239° (H2O-HCONMe2), 78; SH, MeS, SH, H, above 360° (H2O-alc.), 80. For comparison of structure and biol. activities in pyrimidine thiols, a number of new related 4-pyrimidine thiols substituted in position 5 were synthesized. Thiopyrimidine (0.08 mole) stirred in 250 ml. N NaOH treated with a stoichiometric amount of the appropriate alkyl halide, the mixture stirred 3 hrs. and the H2O-washed precipitate recrystallized gave the corresponding alkylthiopyrimidine (method A). Similarly, the above reaction mixture on failure to give a precipitate was acidified with AcOH and the product recrystallized to yield the required alkyl thiopyrimidine (method B). The yields ranged from 80 to 95%. Phys. data for alkylthio- and aralkylthiopyrimidines are listed [R, R1, R2, R3 of formula II, method of synthesis, m.p. (solvent, if other than HCONMe2 + H2O) given]: MeS, H, OH, H, B, 230° (H2O); PhCH2S, H, OH, H, B, 238-9°; 2,4-Cl2C6H3CH2S, H, OH, H, B, 191.3°; MeS, H, H2 N, H, A, 168-70°; EtS, H, H2N, H, A, 147-9°; PhCH2S, H, H2N, H, A, 140°; 2,4-Cl2C6H3CH2S, H, H2N, H, A, 184-6°; p-O2NC6H4CH2S, H, H2N, H, A, 165-7°; MeS, H, MeS, H, A, 52-4° (C7H16); MeS, H, MeS, H2N, A, 79°; MeS, H, MeS, Cl, A, 118-20°; EtS, H, EtS, Cl, A, 58-9°; PhCH2S, H, PhCH2S, Cl, A, 86-8°; 2,4-Cl2C6H3CH2S, H 2,4-Cl2C6H3CH2S, Cl, A, 155°; MeS, H, MeS, Br, A, 155°; PrS, H, PrS, Br, A, 44-6°; PhCH2S, H, PhCH2S, Br, A, 95-7°; 2,4-Cl2C6H3CH2S, H, 2,4-Cl2C6H3CH2S, Br, A, 149°; p-O2NC6H4CH2S, H, p-O2NC6H4CH2S, Br, A, 168-70°; PhCH2S, OH, OH, H, B, 242°; H, OH, o-ClC6H4CH2S, H, A, 174-6°; H, OH, 2,4-Cl2C6H3CH2S, H, A, 193-4°; MeS, H2N, H, H, A, 150-3°; Et, H2N, H, H, A, 155°; PhCH2S, H2N, H, H, A, 178-80°; 2,4-Cl2C6H3CH2S, H2N, H, H, A, 155-7°; o-ClC6H4CH2S, H2N, Me, H, A, 143-5°; MeS, H2N, Cl, H, A, 106-8°; EtS, H2N, Cl, H, A, 109-10°; PrS, H2N, Cl, H, A, 105-6°; PrS, H2N, Me, Br, A, 95-7°; o-ClC6H4CH2S, H2N, Me, Br, A, 138-40°; p-O2NC6H4CH2S, H2N, Me, Br, A, 226-8°; EtS, H2N, EtS, H, A, 54°; PrS, H2N, PrS, H, A, 85-7°; PhCH2S, H2N, PhCH2S, H, A, 134-6°; 2,4-Cl2C6H3CH2S, H2N, 2,4-Cl2C6H3CH2S, H, A, 159-61°; MeS, H2N, MeS, Ph, A, 128-9° (C7H15); PhCH2S, H2N, PhCH2S, Ph, A, 207-9° (C7H15); o-ClC6H4CH2S, H2N, o-ClC6H4CH2S, Ph, A, 174-5° (EtOAc); 2,4-Cl2C6H3CH2S, H2N, 2,4-Cl2C6H3CH2S, Ph, A, 164-7° (PhMe); MeS, MeS, Me, H, A, 43-5° (C7H15); 2,4-Cl2C6H3CH2S, MeS, Me, H, A, 100-2°; H2N, MeS, MeS, H, A, 121-3°; MeS, MeS, MeS, H, A, 114-16°; H, MeS, MeS, CO2H, B, 201-3°; PhCH2S, PhCH2S, Me, H, A, 37-9° (C7H15); o-ClC6H4CH2S, o-ClC6H4CH2S, o-ClC6H4CH2S, H, A, 117-18° (H2O-alc.); 2,4-Cl2C6H3CH2S, 2,4-Cl2C6H3CH2S, H, H, A, 94-6° (C7H15); 2,4-Cl2C6H3CH2S, 2,4-Cl2C6H3CH2S, Me, H, A, 107-9° (C7H15); H2N, 2,4-Cl2C6H3CH2S, 2,4-Cl2C6H3CH2S, H, A, 125-7° (C7H15); 2,4-Cl2C6H3CH2S, 2,4-Cl2C6H3CH2S, 2,4-Cl2C6H3CH2S, H, A, 120-4°. Other II prepared were (R, R1, R2, R3, method of synthesis, and m.p. (solvent) given): MeS, OH, H2N, H, B, 294° (H2O); MeS, H2N, Me, H, A, 152°; EtS, H2N, Me, H, A, 122-4°; BuS, H2N, Me, H, A, 70-2°; PhCH2S, H2N, Me, H, A, 118-20°; 2,4-Cl2C6H3CH2S, H2N, Me, H, A, 157-60°; p-O2NC6H4CH2S, H2N, Me, H, A, 157-9°; MeS, H2N, OH, H, B, 274-6°; EtS, H2N, OH, H, B, 248°; PrS, H2N, OH, H, B, 228-32°; BuS, H2N, OH, H, B, 240-2°; C6H11S, H2N, OH, H, B, 185°; MeS, H2N, Me, Br, A, 140-2°; PhCH2S, H2N, Me, Br, A, 135-7°; MeS, H2N, MeS, H, A, 116-18°; OH, MeS, MeS, H, B, 197° (H2O). Ultraviolet maximum at pH 1 and 11 were given for the II prepared

I hope my short article helps more people learn about this compound(2-Amino-6-methylpyrimidine-4-thiol)Recommanded Product: 6307-44-4. Apart from the compound(6307-44-4), you can read my other articles to know other related compounds.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

Category: isothiazole. Aromatic compounds can be divided into two categories: single heterocycles and fused heterocycles. Compound: Aluminum(III) sulfate xhydrate, is researched, Molecular Al2H8O13S3, CAS is 17927-65-0, about The influence of environmental factor on the coagulation enhanced ultrafiltration of algae-laden water: Role of two anionic surfactants to the separation performance. Author is Zhu, Tingting; Qu, Fangshu; Liu, Bin; Liang, Heng.

With the acceleration of urbanization and the improvement of people′s living standards, more chems. that humans rely on are entering the city and surrounding water bodies. Anionic surfactants are one of the essential products for human beings. It is also one of the inducements that cause the eutrophication. The algae-laden water caused by eutrophication is a headache in the traditional water treatment process. To solve the problem, ultrafitration combined process was widely investigated to treat the algae-laden water. The presence of stimuli, low concentration anionic surfactant, probably interfere the performance of ultrafiltration process during algae-laden water treatment. In this study, the influence of two typical anionic surfactants, sodium dodecyl sulfate (SDS) and sodium dodecyl benzene sulfonate (LAS), on the performance of coagulation-enhanced ultrafiltration was investigated. The aluminum sulfate hydrate and iron sulfate hydrate were resp. employed as coagulant. Based on the residual turbidity and zeta potential, 4 mg/L Al and 8 mg/L Fe were determined as the optimal coagulant dosage. The floc morphol. confirmed that Al-algae flocs with lower fractal dimension (Df) were looser and more porous compared to Fe-algae flocs. More coagulant was depleted by LAS due to the better hydrophobicity of LAS. During the filtration process, LAS caused a larger flux reduction compared with SDS regardless of the coagulant that was used. More organic compounds penetrate into membrane pores and block the pores with the presence of LAS since algal cell aggregation was weakened. Finally, the rejection of organic compounds by the coagulation-enhanced ultrafiltration process was studied, and the co-existing surfactants can cause effluent deterioration. Therefore, the presence of surfactants has a neg. effect to the ultrafiltration treatment of algae-laden water.

I hope my short article helps more people learn about this compound(Aluminum(III) sulfate xhydrate)Category: isothiazole. Apart from the compound(17927-65-0), you can read my other articles to know other related compounds.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com