Category: isothiazole

It is a common heterocyclic compound, the isothiazole compound, 3-Piperazinobenzisothiazole hydrochloride, cas is 87691-88-1 its synthesis route is as follows.

EXAMPLE 75; 5-[2-(4-BENZO[D]ISOTHIAZOL-3-YL-PIPERAZIN-1-YL)-ACETYL]- 1, 1, 3, 3-TETRAMETHYL-INDAN-2-ONE A mixture of 5- (2-Chloro-acetyl)-1, 1,3, 3-tetramethyl-indan-2-one (7.85 g, 29.6 mmol), 3-piperazin-1-yl-benzo[d]isothiazole hydrochloride (7.95 g, 31.1 mmol), potassium carbonate (13.5 g, 97.7 mmol), sodium iodide (4.50 g, 30.0 mmol) in acetonitrile (550 mL) was stirred at rt for 24 h. The reaction was quenched with water (120 mL), and acetonitrile was evaporated. The residue was extracted with methylene chloride (2 x 250 mL). The combined organic extracts were washed with water, brine, dried over Na2SO4, evaporated, and purified by chromatography (silica gel, 7: 3 to 6: 4 hexanes/ethyl acetate) to give 5-[2-(4-Benzo [agisothiazol-3-yl- piperazin-1-yl)-acetyl]-1, 1,3, 3-tetramethyl-indan-2-one (11.2 g, 85%) as an off-white solid :’H NMR (300 MHz, CDC13) 8 8.02 (dd, J= 8.0, 1.6 Hz, 1 H), 7.96 (s, 1 H), 7.91 (d, J = 8.0 Hz, 1 H), 7.83 (d, J = 8.0 Hz, 1 H), 7.47 (t, J = 7.0 Hz, 1 H), 7.38-7. 34 (m, 2H), 3.94 (br s, 2H), 3.67-3. 65 (m, 4H), 2.90- 2.88 (m, 4H), 1.38 (s, 6H), 1.37 (s, 6H).

87691-88-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,87691-88-1 ,3-Piperazinobenzisothiazole hydrochloride, other downstream synthetic routes, hurry up and to see

Reference：
Patent; WARNER-LAMBERT COMPANY LLC?; WO2005/56540; (2005); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, and cas is 936-16-3, its synthesis route is as follows.

Step 2. A mixture of 23 (180 mg, 0.70 mmol), 1 (60 mg, 0.35 mmol), CsF (107 mg, 0.70 mmol), Cs2CO3 (458 mg, 1.41 mmol) in DMF (3 mL) was degassed and purged with N2 (3X). The mixture was stirred at 80°C for 1 h, filtered, and then purified by prep-HPLC to give Compound 143 (15 mg, 5percent) as a light yellow solid. 1H NMR (DMSO-d6, 400MHz) delta 7.97 (d, 1H), 7.81 (s, 1H), 7.72 (d, 1H), 7.43 (s, 1H), 7.31 (s, 2H), 7.18 (s, 2H), 5.09 (s, 2H), 2.33 (s, 3H); LCMS (ESI): m/z 356.0 (M+H).

936-16-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,936-16-3 ,2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, other downstream synthetic routes, hurry up and to see

Reference：
Patent; NUMERATE, INC.; RAIMUNDO, Brian; KOLTUN, Elena S.; GRIFFIN, John; STANGELAND, Eric; (93 pag.)WO2018/49324; (2018); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

It is a common heterocyclic compound, the isothiazole compound, 4-Bromoisothiazole, cas is 24340-77-0 its synthesis route is as follows.

4-bromoisothiazole (commercially available from Aurora, 500 mg, 3.05 mmol) was dissolved in degassed 1 ,2-Dimethoxyethane (DME) (5 ml). Pd(Ph3)4 (176 mg, 0.152 mmol) was added thereto. The reaction mixture was stirred at room temperature for 15min. [2,4-bis(methyloxy)-5-pyrimidinyl]boronic acid (commercially available from Aldrich ,1178 mg, 6.40 mmol) and 5ml_ of degassed 1 M/H2O solution of NaHCO3 were added to the reaction mixture under N2 atm. After 2h30min stirring at 900C the mixture was diluted with water and extracted with DCM. The collected organic phases were evaporated. The residue was purified by flash chromatography eluting with cyclohexane/EtOAc 5:1. 686 mg of the title compound were isolated as a yellow solid. MS (ES) {mlz): 224.06 [M+H]+.

24340-77-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,24340-77-0 ,4-Bromoisothiazole, other downstream synthetic routes, hurry up and to see

Reference：
Patent; Glaxo Group Limited; WO2009/43883; (2009); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

288-16-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Isothiazole, cas is 288-16-4,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

Compound 1 (20 g, 0.235 mol) was added under stirring with nitrogen to dry 100 ml of ether and stirred to dissolve,And then cooled to below 0 ,To this was added n-butyllithium (0.24 mol)During the dropping process, the temperature was kept below 0 C,After the dropwise addition, the incubation reaction was carried out until no compound 1 was added.To the reaction solution was added bromine (0.5 mol)During the dropping process, the temperature was kept below 0 C,After the dropwise addition, slowly raise to room temperature,After stirring for half an hour, the reaction was quenched by the addition of hydrochloric acid solution (2N, 500 ml).The aqueous phase was extracted with ether (200 ml * 3) and discarded.The combined organic phase, sodium dithionite solution (100 ml * 2)Dried over anhydrous sodium sulfate, filtered and concentrated to dryness,A yellow oily compound was prepared.

The chemical industry reduces the impact on the environment during synthesis,288-16-4,Isothiazole,I believe this compound will play a more active role in future production and life.

Reference：
Patent; Tianjin Jinyao Group Co., Ltd.; Li Jing; He Guangjie; Yang Xinyi; Wang Shuli; Chen Liying; Hu Xiaoyun; Sun Liang; (37 pag.)CN106890176; (2017); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

27148-03-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, cas is 27148-03-4,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

The complex was synthesized by addition of 4,4′-trimethylenedipyridine (6.2 mg, 0.031 mmol) and thiosaccharine (12.7 mg, 0.0638 mmol), respectively, to a solution of Zn(NO3)26H2O (10.2mg, 0.0342 mmol) in ethanol:water (4 ml), and kept under mechanical stirring at room temperature. The resulting yellow solid was filtered off and washed with cold water. By slow evaporation of the mother solution single crystals appeared. They were washed with water and analysed using X-ray diffraction. Yield: 82%. Molar conductivity (mS M1) = 28.3. Analytical percent composition calculated for C27H22N4O4S4Zn: C = 49.127%; H = 3.359%;N = 8.487%. Found: C = 48.811%; H = 2.981%; N = 8.378%. Soluble in DMSO and DMF. Slightly soluble in water, ethanol, methanol, chloroform. Insoluble in acetone and methane dichloride. UV-Visible [DMSO, kmax nm]: 347.1H NMR (300 MHz, DMSO) d 8.46 (dd, 4H), 7.92 (m, 2H), 7.58-7.72 (m, 6H), 7.28 (dd, 4H), 2.64 (t, 4H), 1.93 (m, 2H). 13C NMR (75 MHz, DMSO) d 191.71 (C1), 151.07 (C10), 149.31 (C8), 137.98(C7), 136.56 (C2), 132.05 (C4), 130.82 (C5), 125.07 (C3), 124.04(C9), 119.01 (C6), 33.80 (C11), 30.12 (C12).

The chemical industry reduces the impact on the environment during synthesis,27148-03-4,Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide,I believe this compound will play a more active role in future production and life.

Reference：
Article; Delgado, Fermin; Freire, Eleonora; Baggio, Ricardo; Gonzalez Pardo, Veronica; Dorn, Viviana; Dennehy, Mariana; Inorganica Chimica Acta; vol. 479; (2018); p. 266 – 274;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is 3-Bromoisothiazole, and cas is 55512-82-8, its synthesis route is as follows.

General procedure: N-(4-Bromo-3-{[(d imethylam ino)methylene]su lfamoyl}phenyl)-2-(2-chlorophenyl)acetamide (amount as indicated in examples) was dissolved in methanol (3 mL in case of 0.59 mmol scale) and degassed with nitrogen. Bis(pinacolato)diboron (2.5 eq), mesylate[(di(1 -adamantyl)-n-butylphosphine)-2-(2?-amino-1 ,1 ?-biphenyl)]palladium(l I) (cataCXium A Pd G3, 0.05 eq) and N,N-diisoproyplethylamine (2.5 eq) were added andit was stirred for 1 hour at 50C. The catalyst was removed by filtration and the filtrate was reduced in vacuo.The crude was redissolved in n-propanol (3 mL in case of 0.59 mmol scale), followed by degassing with nitrogen. The corresponding hetarylbromide (2 eq), potassium fluoride (0.23 eq), bis(tri-tert-butylphosphine)palladium(0) (0.05 eq) and triphenylphosphine (0.05 eq) were added. It was again degassed with nitrogen and potassium phosphate (2.5 eq) was added, followed by irradiating for 1 hour at 10000 in the microwave.Any precipitate was removed by filtration and the filtrate was concentrated in vacuo andredissolved in methanol (2 mL in case of 0.59 mmol scale). Aqueous ammoniumhydroxide solution (33%, 2 mL) was added. It was stirred until UPLC-MS showed completion of deprotection. In most cases stirring overnight was sufficient, in certain cases longer stirring and addition of further aqueous ammonium hydroxide solution was necessary. The reaction mixture was then concentrated in vacuo and purified as indicatedintheexamples.

55512-82-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,55512-82-8 ,3-Bromoisothiazole, other downstream synthetic routes, hurry up and to see

Reference：
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; WERNER, Stefan; MESCH, Stefanie; CLEVE, Arwed; BRAeUER, Nico; HERBERT, Simon, Anthony; KOCH, Markus; DAHLLOeF, Henrik; OSMERS, Maren; HARDAKER, Elizabeth; LISHCHYNSKYI, Anton; (673 pag.)WO2017/191000; (2017); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

It is a common heterocyclic compound, the isothiazole compound, 3-Piperazinobenzisothiazole hydrochloride, cas is 87691-88-1 its synthesis route is as follows.

EXAMPLE 6 The mixture of 2.1 g of 4-(1,2-benzisothiazol-3-yl)piperazine hydrochloride, 2.0 g of 3-(3-chloropropionyl)-2-methyl-4,6,7,8-tetrahydro-5H-thieno[3,2-b]azepin-5-one, 2,2 g of potassium carbonate and 1.2 g of potassium iodide in 15 ml of N,N-dimethylformamide and 15 ml of toluene was stirred at 60 C. for 5 hours. After the mixture was cooled in a water bath, water was added thereto and the mixture was extracted with ethyl acetate. The organic layer was washed with saline solution, dried over magnesium sulfate and concentrated. The residue was purified by column chromatography on a silica gel, dissolved in isopropyl alcohol and crystallized from isopropyl alcohol-isopropyl ether. The resulting crystals were recrystallized from ethanol to give 1.30 g of 3-(3-(4-(1,2-benzisothiazol-3-yl)piperazin-1-yl)propionyl)-2-methyl-4,6,7,8-tetrahydro-5H-thieno[3,2-b]azepin-5-one as white crystals, m.p. 146-147 C.

87691-88-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,87691-88-1 ,3-Piperazinobenzisothiazole hydrochloride, other downstream synthetic routes, hurry up and to see

Reference：
Patent; Yoshitomi Pharmaceutical Industries, Ltd.; US5532240; (1996); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is 3-Piperazinobenzisothiazole hydrochloride, and cas is 87691-88-1, its synthesis route is as follows.

A heterogeneous mix of 6-(chloromethylcarbonyl)-4,4,8-trimethyl-3,4-dihydro-1H-quinolin-2-one (2.200g, 8.739mmole, 1.0eq), sodium carbonate (1.158g, 10.924mmole, 1.25 eq), sodium iodide (0.131 g, 0.874mmole, cat.), and added 3-piperazin-1-yl-benzo[d]isothiazole hydrochloride (3.353g, 13.110mmole, 1.5eq) in acetonitrile (35ml) was heated to 150C under microwave assistance for 30min. The reaction was diluted with H2O (100ml), CH2CI2 (100ml) and the layers separated. The aqueous layer was extracted with CH2Cl2 (2x, 50ml) and the organic layer dried over magnesium sulfate (MgSO4), concentrated, and the residue purified by MPLC (25 % EA/CH2CI2 – 50 % EA gradient over 20min and hold for 20min – 100 % EA gradient over 20min). The title compound was obtained as a white crystalline solid in 63 % yield with 30 % recovered starting material (6-(2-chloro-ethyl)-4,4,8-trimethyl-3,4-dihydro-1H-quinolin-2-one). 1H NMR (400 MHz, CDCl3) delta 7.90 (d, 1H, J = 7.94 Hz), 7.80 (d, 1H, J = 7.94 Hz), 7.46 (t, 1H, J = 7.94 Hz), 7.34 (t, 1H, J = 7.94 Hz), 7.02 (s, 1H), 6.91 (s, 1H), 4.78 (s, 1H), 3.69-3.55 (m, 4H), 2.86-2.59 (m, 8H), 2.45 (s, 2H), 2.21 (s, 3H), 1.30 (s, 6H)

87691-88-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,87691-88-1 ,3-Piperazinobenzisothiazole hydrochloride, other downstream synthetic routes, hurry up and to see

Reference：
Patent; WARNER-LAMBERT COMPANY LLC; WO2004/26864; (2004); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

87691-88-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Piperazinobenzisothiazole hydrochloride, cas is 87691-88-1,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 121; 3-f4-[2-(3′, 4′-DIHYDRO-1’H-SPI RO [91, 31DIOXOLANE-2. 2′- NAPHTHALEN1-6′-YL)-ETHYL1-PI PERAZI N-1-YLi- BENZOrDlISOTHIAZOLE; A mixture of 3- (piperazin-1-yl) benzo [d] isothiazole hydrochloride (349 mg, 1.36 mmol) and the title compound from Preparation 36 (530 mg, 1.36 mmol) with anhydrous K2CO3 (376 mg, 2.72 mmol) in acetonitrile (20 ml) was heated at reflux for 24 hours. The reaction mixture was filtered and the filtrate was concentrated. The crude product was purified by elution through a flash column (silica gel 60,230-400 mesh, 1: 1 hexanes: EtOAc) to give a clear oil which crystallized on standing, 497 mg (84%). MS (APCI) : (M + 1) + = 436.’H-NMR (CDCI3, a) : 7.89 (d, 1 H, J = 7.8 Hz), 7.80 (d, 1 H, J = 8. 1 Hz), 7.46 (t, 1 H, J = 7. 3,7. 3 Hz), 7.34 (t, 1 H, J = 7. 3, 7.3 Hz), 6.98 (s, 3H), 4.01 (s, 4H), 3.58 (br s, 4H), 2.95-2. 65 (m, 12H), 1.93 (t, 2H, J = 6.8, 6.8 Hz). CHN, calc’d for C25H29N302S : C, 68.94% ; H, 6. 71% ; N, 9.65% ; found: C, 68.75% ; H, 6.70% ; N, 9.54%.

The chemical industry reduces the impact on the environment during synthesis,87691-88-1,3-Piperazinobenzisothiazole hydrochloride,I believe this compound will play a more active role in future production and life.

Reference：
Patent; WARNER-LAMBERT COMPANY LLC?; WO2005/56540; (2005); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

It is a common heterocyclic compound, the isothiazole compound, 4-Bromoisothiazole, cas is 24340-77-0 its synthesis route is as follows.

In a nitrogen atmosphere at 100 C,(2E) -3- (4- (tributylstannyl) pyridin-3-yl) ethyl acrylate (33 mg)4-bromoisothiazole (17.41 mg),Pd (Ph3P) 4 (8.18 mg),Cuprous iodide (I) (2.70 mg),A mixture of cesium fluoride (21.50 mg) and DMF (1.5 mL) was stirred at room temperature for 13 hours.Similarly, in a nitrogen atmosphere, 100 C,(2E) -3- (4- (tributylstannyl) pyridin-3-yl) acrylate (497 mg)4-bromoisothiazole (262 mg), Pd (Ph3P) 4 (123 mg),A mixture of cuprous iodide (I) (40.6 mg), cesium fluoride (324 mg) and DMF (10 mL) was stirred for 13 hours.The reaction mixture was combined and the insoluble material was filtered.The filtrate was diluted with ethyl acetate (20 mL), water (10 mL) and saturated aqueous sodium bicarbonate (10 mL), and the aqueous layer was extracted with ethyl acetate. The extract was washed with water and brine, dried over anhydrous sodium sulfate, and the solvent was removed by distillation under reduced pressure. The residue was purified by silica gel column chromatography (ethyl acetate / hexane) to give the title compound (222 mg).

24340-77-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,24340-77-0 ,4-Bromoisothiazole, other downstream synthetic routes, hurry up and to see

Reference：
Patent; TAKEDA PHARMACEUTICAL COMPANYLIMITED; HIRAYAMA, TAKAHARU; FUJIMOTO, JUN; CARY, DOUGLAS ROBERT; OKANIWA, MASANORI; HIRATA, YASUHIRO; (289 pag.)TW2017/14883; (2017); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com