Downstream synthetic route of 87691-88-1

As the paragraph descriping shows that 87691-88-1 is playing an increasingly important role.

87691-88-1, 3-Piperazinobenzisothiazole hydrochloride is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,87691-88-1

Excess dried, -325 mesh potassium carbonate (20 g) was diluted in 500 mL acetone and 3-piperazin-1-yl-benzoisothiazole hydrochloride (13.37 g, 52.4 mmol was added. The mixture was stirred for 15 min before 2-nitrophenethyl tosylate (15.3 g, 47.7 mmol) and catalytic 18-crown-6 (0.5 g, 1.9 mmol) was added. The mixture was stirred at reflux for 42 h. After cooling, the salts were filtered off and washed with acetone and the filtrate was concentrated. The residue was taken up in methylene chloride and washed with water. The organic layer was dried over sodium sulfate, and concentrated. The residue was triturated with ethyl acetate and the collected solid was washed with ethyl ether and dried in vacuo to afford 13.08 g of a viscous, brown liquid. Yield 75%; MS (APCI): 369 [M+H]+.

As the paragraph descriping shows that 87691-88-1 is playing an increasingly important role.

Reference£º
Patent; Davis, Jamie Marie; Gregory, Tracy Fay; Walters, Michael Anthony; US2004/67960; (2004); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

 

Analyzing the synthesis route of 27148-03-4

The synthetic route of 27148-03-4 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.27148-03-4,Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide,as a common compound, the synthetic route is as follows.

A CH2Cl2 solution (20mL) of [Ru3(CO)12] (100mg, 0.16mmol) and tsacH (63mg, 0.32mmol) was heated to reflux for 8h during which time the color of the solution changed from yellow to deep red. The reaction mixture was then allowed to cool at room temperature, and the solvent was removed under reduced pressure. The residue was separated by TLC on silica gel using a binary eluent composed of n-hexane/CH2Cl2 (v/v, 1:1), yielding a single yellow band corresponding to [Ru2(CO)6(mu-N,S-tsac)2] (1). The product was recrystallized from n-hexane/CH2Cl2 at 4C and furnished orange crystals of analytically pure 1 in 12% yield (14mg). Data for 1: Anal. Calc. for C20H8N2O10Ru2S4: C, 31.33; H, 1.05; N, 3.65. Found: C, 31.64; H, 1.12; N, 3.69%. IR (nuCO, CH2Cl2): 2102s, 2075vs, 2032sh, 2027s, 1961w cm-1. 1H NMR (CDCl3): delta 8.01 (d, J 7.2Hz, 2H), 7.88 (d, J 7.2Hz, 2H), 7.78 (t, J 7.2Hz, 2H), 7.73 (t, J 7.2Hz, 2H)., 27148-03-4

The synthetic route of 27148-03-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Mia, Md. Jadu; Reza, Md. Selim; Bhoumik, Nikhil C.; Ghosh, Shishir; Nesterov, Vladimir N.; Richmond, Michael G.; Kabir, Shariff E.; Journal of Organometallic Chemistry; vol. 906; (2020);,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

 

Analyzing the synthesis route of 18480-53-0

18480-53-0, The synthetic route of 18480-53-0 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.18480-53-0,3,4-Dichloroisothiazole-5-carboxylic acid,as a common compound, the synthetic route is as follows.

(To 4.0 g (20.3 mmol) of 3,4-dichloroisothiazole-5-carboxylic acid were added 8 ml of oxalyl chloride and a catalytic amount of N,N-dimethylformamide (DMF). The mixture was stirred at 50¡ãC for 30 minutes. The reaction mixture was concentrated under vacuum to obtain 3,4-dichloroisothiazole-5-carbonyl chloride.

18480-53-0, The synthetic route of 18480-53-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; KUMIAI CHEMICAL INDUSTRY CO., LTD.; IHARA CHEMICAL INDUSTRY CO., LTD.; EP2039690; (2009); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

 

Application of 6-Chloro-1,2,3,4-tetrahydroquinoline

With the rapid development of chemical substances, we look forward to future research findings about 288-16-4

The isothiazole compound, cas is 288-16-4 name is Isothiazole, mainly used in chemical industry, its synthesis route is as follows.,288-16-4

a) 5-Isothiazolecarboxylic acid was prepared from isothiazole, n-BuLi and dry ice according to the method of step a of Example 258.

With the rapid development of chemical substances, we look forward to future research findings about 288-16-4

Reference£º
Patent; Monsanto Company; US5498630; (1996); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

 

Application of 4-Aminocinnoline-3-carboxamide

With the rapid development of chemical substances, we look forward to future research findings about 936-16-3

The isothiazole compound, cas is 936-16-3 name is 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, mainly used in chemical industry, its synthesis route is as follows.,936-16-3

Intermediate 30Ethyl 1 -[4-(1 ,1 -dioxido-1 ,2-benzisothiazol-2(3H)-yl)phenyl]-3-[[(frapis-4- methylcyclohexyl)carbonyl](1-methylethyl)amino]-1H-pyrazole-4-carboxylateA solution of Intermediate 5 (108 mg), 2,3-dihydro-1 ,2-benzisothiazole 1 ,1 -dioxide (35 mg), copper (I) iodide (4 mg), potassium carbonate (58 mg) and (IR^RJ-lambda/./V-dimethyl-i ^- cyclohexanediamine (12 mg) in DMF (4 mL) was heated in a microwave at 100¡ã C, 300 W for 1 h and then evaporated to dryness. The residue was dissolved in ethyl acetate and washed sequentially with aqueous sodium bicarbonate solution, water and 2M HCI, dried using a EPO hydrophobic frit and evaporated to dryness. The crude product was then purified by MDAP HPLC to give the title compound. MS calcd for (C30H36N4O5 + H)+: 565 MS found (electrospray): (M+H)+ = 565

With the rapid development of chemical substances, we look forward to future research findings about 936-16-3

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/39146; (2007); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

 

Application of 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide

With the rapid development of chemical substances, we look forward to future research findings about 936-16-3

The isothiazole compound, cas is 936-16-3 name is 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, mainly used in chemical industry, its synthesis route is as follows.,936-16-3

General procedure: Potassium carbonate was dissolved in DMF, and 1,2-bezeneisothiazolin-1,1-dioxide (8) (1 equiv.) in dichloromethanewas added to the reaction solution, and stirred for overnight. Then,the reaction mixture was filtered through Celite, and washed with1 N HCl and saturated sodium hydrogen carbonate solution. Residualsolution was dried over magnesium sulfate, and concentratedin vacuo, and purified by column chromatography to afford the titlecompound.

With the rapid development of chemical substances, we look forward to future research findings about 936-16-3

Reference£º
Article in Press; Hong, Jin Ri; Choi, Young Jin; Keum, Gyochang; Nam, Ghilsoo; Bioorganic and Medicinal Chemistry; (2017);,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

 

Introduction of a new synthetic route about 4-Bromoisothiazole

With the rapid development of chemical substances, we look forward to future research findings about 24340-77-0

4-Bromoisothiazole, cas is 24340-77-0, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,24340-77-0

Step 1: Synthesis of 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)isothiazole To a stirred solution of 4-bromoisothiazole (0.2 g, 1.21 mmol) and Bis(pinacolato)diboron (0.464 g, 1.81 mmol) in Dioxane (10 mL) was added AcOK (0.358 g, 3.61 mmol) along with TPP (0.032 g, 0.12 mmol) and reaction mass was purged with nitrogen for 30 min. Then, Pd2(dba)3 (0.056 g, 0.061 mmol) was added to it and stirred at 100 C. for 16 h. Reaction was monitored by TLC. On completion reaction mass was concentrated under reduced pressure and extracted with ethyl acetate. The organic layer was washed with water, brine, dried over sodium sulphate, concentrated under reduced pressure obtained crude which was purified column chromatography; eluent 3% EtOAc/Hexane to afford 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)isothiazole (0.07 g, 27%) as yellow solid. MS: 212.1[M++1]

With the rapid development of chemical substances, we look forward to future research findings about 24340-77-0

Reference£º
Patent; Mankind Pharma Ltd.; Patil, Rakesh Ishwar; Verma, Jeevan; Shah, Dharmesh; Ali, Sazid; Bapuram, Srinivasa Reddy; Rai, Santosh Kumar; Kumar, Anil; (146 pag.)US2017/291910; (2017); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

 

Introduction of a new synthetic route about 3-Piperazinobenzisothiazole hydrochloride

With the rapid development of chemical substances, we look forward to future research findings about 87691-88-1

3-Piperazinobenzisothiazole hydrochloride, cas is 87691-88-1, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,87691-88-1

EXAMPLE 61 3-(4-(1-[1,2-Benzisothiazol-3-yl]-4-piperazinyl)butyl)-5-methyl-4-thiazolidinone A mixture of 3-(4-bromobutyl)-5-methyl-4-thiazolidinone (4.00 g), 1-(1,2-benzisothiazol-3-yl)piperazine hydrochloride (4.46 g), K2 CO3 (8.00 g) and NaI (300 mg) in acetonitrile (210 ml) was heated at 40-45 C. for 64 hours and the product was processed in substantially the same manner as in Example 10 to afford 3.64 g of crystals, m.p. 113-115 C. ANALYSIS: Calculated for C19 H26 N4 OS2: 58.43%C; 6.71%H; 14.34%N. Found: 58.32%C; 6.69%H; 14.29%N.

With the rapid development of chemical substances, we look forward to future research findings about 87691-88-1

Reference£º
Patent; Hoechst-Roussel Pharmaceuticals Incorporated; US5229388; (1993); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

 

Introduction of a new synthetic route about Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide

With the rapid development of chemical substances, we look forward to future research findings about 27148-03-4

Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, cas is 27148-03-4, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,27148-03-4

a solution of thiosaccharinate (0.26 g, 1.33 mmol) in hot water (30 cm3) was added to a solution of cis-[PtCl2(NH3)2] (0.20 g, 0.667 mmol) in hot water (15 cm3). The mixture was reuxed for 2 h. The light-brown solid formed was ltered off washed several times with distilled water and dried in vacuo. Yield: 89% (0.39 g). Anal. Calcd. for C14H14N4O4PtS4: C, 26.88; H, 2.26; N,8.96. Found: C, 26.33; H, 2.09; N, 8.86%. IR (KBr) (nu, cm-1): 3471 m, 3413 m, 3286 m, 1627s,1440w, 1373s, 1315s, 1236 m, 1155 m, 1126s, 1008w, 817 s, 515 m. 1H NMR (d6-DMSO): 7.96-7.90 (m, 4H), 7.82-7.75 (m, 4H), 4.54 (s, 6 H). 13C{1H} NMR (d6-DMSO): 182.8, 137.6,133.7, 133.4, 133.1, 124.3, 120.7 ppm.

With the rapid development of chemical substances, we look forward to future research findings about 27148-03-4

Reference£º
Article; Al-Jibori, Subhi A.; Al-Jibori, Ghassan H.; Al-Hayaly, Lamaan J.; Wagner, Christoph; Schmidt, Harry; Timur, Suna; Barlas, F. Baris; Subasi, Elif; Ghosh, Shishir; Hogarth, Graeme; Journal of Inorganic Biochemistry; vol. 141; 1; (2014); p. 55 – 57;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

 

Introduction of a new synthetic route about 4-Bromoisothiazole

With the rapid development of chemical substances, we look forward to future research findings about 24340-77-0

4-Bromoisothiazole, cas is 24340-77-0, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,24340-77-0

n-Butyllithium (2.5 M solution in hexanes, 10.5 mL, 26.2 mmol) was added to a-78 00 solution of diisopropylamine (3.68 mL, 26.3 mmol) in tetrahydrofuran (80 mL).After 30 minutes, a solution of 4-bromo-1 ,2-thiazole (3.70 g, 22.5 mmol) intetrahydrofuran (20 mL) was added drop-wise, and stirring was continued at -78 00 for 30 minutes, whereupon methyl carbonocyanidate (99%, 2.15 mL, 26.8 mmol) was added. After an additional 30 minutes at -78 00 the reaction mixture was quenched via addition of saturated aqueous ammonium chloride solution, and the resulting mixturewas warmed to room temperature. After dilution with water, it was extracted with ethyl acetate; the combined organic layers were washed with saturated aqueous sodium chloride solution, dried over magnesium sulfate, filtered, and concentrated in vacuo. Purification via silica gel chromatography (Eluent: 5% ethyl acetate in heptane) provided the product as a white solid. Yield: 4.0 g, 18 mmol, 80%. 1H NMR (400 MHz, ODd3) oe8.43 (5, 1H), 3.97 (5, 3H).

With the rapid development of chemical substances, we look forward to future research findings about 24340-77-0

Reference£º
Patent; PFIZER INC.; GRAY, David Lawrence Firman; ZHANG, Lei; DAVOREN, Jennifer Elizabeth; DOUNAY, Amy Beth; EFREMOV, Ivan Viktorovich; MENTE, Scot Richard; SUBRAMANYAM, Chakrapani; WO2015/162515; (2015); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com