Heterocyclic Building Blocks-Isothiazole

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.18480-53-0,3,4-Dichloroisothiazole-5-carboxylic acid,as a common compound, the synthetic route is as follows.

EXAMPLE 6 Synthesis of potassium 3,4-dichloroisothiazole-5-carboxylate (Compound No. 7) Potassium hydroxide (0.27 g) dissolved in 3 ml of water was added to a solution of 3,4-dichloroisothiazole-5-carboxylic acid (0.95 g) in 4 ml of ethanol. The solvent was distilled off under reduced pressure. The crystals thus obtained were washed with a small quantity of ethanol.

18480-53-0, The synthetic route of 18480-53-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Mitsui Toatsu Chemicals, Incorporated; US5240951; (1993); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

87691-88-1, 3-Piperazinobenzisothiazole hydrochloride is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

87691-88-1, (iii) Preparation of 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro-2H-indol-2-one : Charge 1.0 litre demin water, 100 gm of step (ii) product, 122.4 gm 3-(1-piperazinyl)-1,2-benzisothiazole HCl] and 138.2 gm of sodium carbonate into a 3 litre three neck flask at 25 to 30C. Stir for 15 mins and heat to reflux temperature 95 to 100C. Maintain at reflux temperature for 15 hrs. Cool the reaction mixture to 45-50C. Add 1.0 lt of demin water into the reaction mixture and stir for 30 mins. Filter at 45 to 50C and wash with demin water. Suck dry for 30 mins to yield crude product. Charge 2 lt of demin water and above crude product and heat the mixture gradually to 45 to 50C and stir for 30 mins. Filter the product at 45 to 50C and wash with demin water. Suck dry the product for 30 mins. Charge 2.0 lt of demin water and 300 gm of crude product into a 1.0 litre three neck flask at 25 to 30C and heat the mixture gradually to 45 to 50C. Stir for 30 mins. Filter the product at 45 to 50C and wash with demin water till about neutral pH (6.5 to 7.0). Suck dry the product for 30 mins to get wet crude base [5-[2- [4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro-2H-indol-2-one. Add 300 gms of wet crude base and 1.0 lt of isopropanol at 25 to 30C. Warm the reaction mixture to 50 to [55C] and stir for 1.0 hr. Cool the reaction mixture gradually to 10 to 15C and stir for 30 mins. Filter the product and wash with chilled isopropanol. Suck dry for 30 mins. Charge 300 gm of wet crude base and 6 lt of tetrahydrofuran (THF). Heat the reaction mixture gradually to reflux temperature 65- 70C. Reflux till clear solution. Cool to 50 to 55C and add charcoal and stir for 30 min at 50 to 55C. Filter the charcoal and wash with hot THF. Distill out THF at 50 to 55C under vacuum till residual volume is 1 lt and cool the reaction mixture gradually to 5 to 10C and stir for 1 hr. Filter the product and wash with chilled THF. Suck dry the product for 30 mins. Dry the product at 60 to 65C.

87691-88-1 3-Piperazinobenzisothiazole hydrochloride 11521711, aisothiazole compound, is more and more widely used in various.

Reference£º
Patent; SUN PHARMACEUTICAL INDUSTRIES LIMITED; WO2003/99198; (2003); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

24340-77-0, 4-Bromoisothiazole is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The above oily liquid was dissolved in 10 mL of DME and 2 mL of water, and 4-bromoisothiazole (275 mg, 1.68 mmol), Pd(PPh3)4 (48 mg, 0.042 mmol) and Na2CO3 (296 mg, 2.80 mmol), and the reaction was stirred at 100 C for 2 hours under nitrogen atmosphere. After cooling to room temperature, the reaction solution was poured into 60 mL of water and extracted three times with 20 mL of ethyl acetate. The combined ethyl acetate was washed with brine and dried over anhydrous sodium sulfate. Filtered, and concentrated by column chromatography (petroleum ether / ethyl acetate 1/1) to give 72mg as a white solid powder.

24340-77-0, As the paragraph descriping shows that 24340-77-0 is playing an increasingly important role.

Reference£º
Patent; Shenzhen Tajirui Bio-pharmaceutical Co., Ltd.; Wang Yihan; Zhao Jiuyang; (35 pag.)CN109651359; (2019); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.288-16-4,Isothiazole,as a common compound, the synthetic route is as follows.

Under nitrogen protection, compound 1 was added(20 g, 0.235 mol) was added to dry 100 ml of ether and stirred to dissolve,And then cooled to below 0 ,To this was added n-butyllithium (0.24 mol)During the dropping process, the temperature was kept below 0 C,After the dropwise addition, the incubation reaction was carried out until no compound 1 was added.To the reaction solution was added bromine (0.5 mol)During the dropping process, the temperature was kept below 0 C,After completion of the dropwise addition, the temperature was gradually raised to room temperature, and after stirring for half an hour, the reaction was quenched by adding thereto a hydrochloric acid solution (2N, 500 ml). (100ml * 2), dried over anhydrous sodium sulfate, filtered and concentrated to dryness. After drying, the aqueous phase was washed with diethyl ether (200ml * 3) and extracted.To give the yellow oily compound 2.

288-16-4, The synthetic route of 288-16-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Tianjin Jinyao Group Co., Ltd.; Li Jing; He Guangjie; Yang Xinyi; Wang Shuli; Chen Liying; Hu Xiaoyun; Sun Liang; (37 pag.)CN106890175; (2017); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

24340-77-0, 4-Bromoisothiazole is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of 7 (497 mg, 1.07 mmol) in DMF (10 mL) were added 4-bromoisothiazole (262 mg, 1.60 mmol), CsF (324 mg, 2.13 mmol), Pd(PPh3)4 (123 mg, 0.11 mmol) and copper(I) iodide (40.6 mg, 0.21 mmol) at rt. The mixture was stirred at 100 C for 13 h. After removal of insoluble materials by filtration, the filtrate was diluted with EtOAc (20 mL), water (10 mL), and sat. aq. NaHCO3 (10 mL). The aqueous layer was extracted with EtOAc (15 mL ¡Á 3). The organic layers were combined, washed with water and brine, dried over Na2SO4, and concentrated under vacuum. The residue was purified by column chromatography (silica gel, eluted with 5-60% EtOAc/hexane) to yield 8a (208 mg, 75%) as a pale yellow solid. 1H NMR (300 MHz, DMSO-d6) delta 1.24 (3H, t, J = 7.1 Hz), 4.19 (2H, q, J = 7.1 Hz), 6.76 (1H, d, J = 16.1 Hz), 7.53-7.62 (2H, m), 8.66 (1H, d, J = 5.1 Hz), 8.77 (1H, s), 9.06 (1H, s), 9.28 (1H, s). MS (API): m/z 260.9 (M + H)+

24340-77-0, As the paragraph descriping shows that 24340-77-0 is playing an increasingly important role.

Reference£º
Article; Fujimoto, Jun; Hirayama, Takaharu; Hirata, Yasuhiro; Hikichi, Yukiko; Murai, Saomi; Hasegawa, Maki; Hasegawa, Yuka; Yonemori, Kazuko; Hata, Akito; Aoyama, Kazunobu; Cary, Douglas R.; Bioorganic and Medicinal Chemistry; vol. 25; 12; (2017); p. 3018 – 3033;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

87691-88-1, 3-Piperazinobenzisothiazole hydrochloride is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,87691-88-1

A 2 L reaction flask was charged with 88.5 g (lR, 2R) -1,2-cyclohexanedimethanol dimethanesulfonate, 71.8 g3- (1-piperazinyl) -1,2-benzisothiazole hydrochloride, 77.5 g of potassium carbonate and 1 L of acetonitrile were added and the mixture was heated under reflux with stirring. After the reaction is complete, hotFiltration, filter cake rinse with acetonitrile, the filtrate concentrated to dry under vacuum, in an off-white solid 104. 6g, 88% yield, HPLC purity is greater than99%, m.p. 228-230 C.

87691-88-1 3-Piperazinobenzisothiazole hydrochloride 11521711, aisothiazole compound, is more and more widely used in various.

Reference£º
Patent; Suzhou Er Ye Pharmaceutical Co., Ltd; Liu, Zhi; Wu, Yongfeng; Fan, Shengya; (5 pag.)CN105732644; (2016); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

4576-90-3,4576-90-3, Isothiazole-3-carboxylic acid is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

[00163] To a solution of isothiazole-3-carboxylic acid (20 mg, 0.15 mmol), EDC (32.4 mg, 0.17 mmol), HOBt (23. mg, 0.17 mmol) in DMF (0.3 mL) was added 3- amino-N-cyclopropyl-4-methyl-benzamide hydrochloride (35 mg, 0.15 mmol) followed by DIPEA (0.03 mL, 0.17 mmol). The reaction was heated at 500C for 1 h. Water (0.6 mL) was added dropwise and the reaction removed from heating. The solids were stirred overnight at room temp, filtered, and washed with water to give (42.1 mg, 91% yield). HPLC tR= 2.63 min, 99.80 % purity; LCMS 302.1 (M + H).

The synthetic route of 4576-90-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2008/57775; (2008); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.87691-88-1,3-Piperazinobenzisothiazole hydrochloride,as a common compound, the synthetic route is as follows.

87691-88-1, 3-Piperazin-1-yl-benzoisothiazole hydrochloride (5. 29 G, 20.7 MMOL) and 4, 5-dimethoxy-2-nitrophenylacetic acid (5 g, 20.7 MMOL) were combined in 200 mL methylene chloride with triethylamine (5.77 mL, 41.4 MMOL). This solution stirred for 15 min before BIS- (2-OXO-3-OXAZOLIDINYL) phosphinic chloride (5.26 g, 20.7 MMOL) was added. After stirring overnight at rt, the reaction was quenched with water and extracted into methylene chloride. The organic layer was washed with 0.5 N HCI, water, sodium bicarbonate then water before it was dried over NA2SO4 and concentrated. The residue was taken up in methylene chloride and washed with water. The organic layer was dried over sodium sulfate, and concentrated then purified by MPLC using a Biotage prepacked silica gel cartridge eluting with 3% methanol in methylene chloride to afford 6.5 g of a tan solid. Yield 71% ; 100% purity at 214 nm; LCMS (APCI) : 443 [M+H] + ; MP 170C.

As the paragraph descriping shows that 87691-88-1 is playing an increasingly important role.

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC; WO2004/41793; (2004); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com