Heterocyclic Building Blocks-Isothiazole

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.288-16-4,Isothiazole,as a common compound, the synthetic route is as follows.

To a solution of isothiazole (5.0 g, 58.82 mmol) in AcOH (37 mL) was added Br2 (12.5 g, 78.12 mmol) dropwise at 95 oC over 20 min and the mixture was stirred for 6 h at 95 oC, then cooled to RT, and poured into ice water (100 mL). The resulting mixture was extracted with Et2O (200 mL x 2). The organic phases were washed with 6N NaOH to pH at 7~8, dried over anhydrous Na2SO4 and filtered. The filtrate was concentrated in vacuo, and the resulting residue was purified by distillation to afford 4-bromoisothiazole as a white solid (1.5 g, 15%)., 288-16-4

The synthetic route of 288-16-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; LYSOSOMAL THERAPEUTICS INC.; SKERLJ, Renato, T.; BOURQUE, Elyse Marie Josee; LANSBURY, Peter, T.; GREENLEE, William, J.; GOOD, Andrew, C.; (309 pag.)WO2017/176961; (2017); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.822-82-2,Isothiazole-4-carboxylic acid,as a common compound, the synthetic route is as follows.,822-82-2

To a solution of l-[4-[propyl(tetrahydropyran-4-yl)amino]-5-oxido-6,7-dihydro- thieno[3,2-d]pyrimidin-5-ium-2-yl]azetidin-3-ol (5.0 mg, 14 muiotatauiotaomicronIota) in DCE (0.2 mL) was added solutions of 4-isothiazolecarboxylic acid (2.6 mg in 0.2 mL DCE, 20 muiotatauiotaomicronIota), DMAP (0.5 mg in 0.1 mL DCE, 4.1 muiotatauiotaomicronIota) and EDAC (3.9 mg in 0.2 mL DCE, 20 muiotatauiotaomicronIota). The mixture was shaken at room temperature overnight before it was concentrated in vacuo. Prep HPLC purification (basic) afforded the title compound as colorless oil. 1H NMR (DMSO-d6) delta: 9.81 (s, 1H), 9.00 (s, 1H), 5.49 (tt, J = 6.6, 3.9 Hz, 1H), 4.88 – 4.65 (m, 1H), 4.54 – 4.39 (m, 2H), 4.13 (dd, 2H), 3.96 (td, J = 11.3, 4.3 Hz, 2H), 3.54 – 3.35 (m, 5H), 3.25 – 3.16 (m, 1H), 3.07 – 2.97 (m, 2H), 1.95 – 1.82 (m, 2H), 1.74 (d, 1H), 1.65 – 1.54 (m, 3H), 0.90 (t, J = 7.3 Hz, 3H). HPLC-Retention time (XE Metode 7 CM) : 2.03 minutes. Detected “M + l”-mass: 478.15.

As the paragraph descriping shows that 822-82-2 is playing an increasingly important role.

Reference£º
Patent; LEO PHARMA A/S; LARSEN, Jens; (110 pag.)WO2019/57806; (2019); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.55512-82-8,3-Bromoisothiazole,as a common compound, the synthetic route is as follows.

Intermediate 123d was reacted with 3-bromoisothiazole in a method analogous to Example 122 to give Example 123 (5.9 mg, 11.5 muiotaetaomicron, 46percent). LC-MS (Method Al) RT = 1.39 min, MS (ESI) m/z: 512.4 (M+H)+. H NMR (500 MHz, DMSO-cfe) delta 9.18 (d, 7=4.6 Hz, 1H), 8.12 (br d, 7=7.9 Hz, 1H), 8.09 – 8.01 (m, 2H), 7.75 (br d, 7=7.9 Hz, 1H), 7.17 (br d, 7=7.9 Hz, 2H), 7.07 (br d, 7=7.9 Hz, 2H), 4.68 (s, 2H), 2.32 (t, 7=7.6 Hz, 2H), 1.90 – 1.77 (m, 6H), 1.67 (br d, 7=6.7 Hz, 2H), 1.49 (quin, 7=7.5 Hz, 2H), 1.27 (dq, 7=14.9, 7.4 Hz, 2H), 0.81 (t, 7=7.3 Hz, 3H) (1 exchangeable proton not observed).

The synthetic route of 55512-82-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; UNIVERSITE DE MONTREAL; BRISTOL-MYERS SQUIBB COMPANY; PRIESTLEY, Eldon, Scott; REZNIK, Samuel, Kaye; RUEDIGER, Edward, H.; GILLARD, James, R.; HALPERN, Oz, Scott; JIANG, Wen; RICHTER, Jeremy; RUEL, Rejean; TRIPATHY, Sasmita; YANG, Wu; ZHANG, Xiaojun; (642 pag.)WO2018/5591; (2018); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

27148-03-4, Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step A: Methyl 2-[(1,1-dioxo-1,2-benzoisothiazol-3-yl)thio]-3-(4-benzyloxyphenyl)propionate The solution of 0.3 g (0.001 mol) of methyl 3-[4-(benzyloxy)phenyl]-2-chloropropionate in methanol (2 ml) was added dropwise to the solution of 0.2 g (0.001 mol) 1,1-dioxo-1,2-benzoisothiazol-3(2H)-thione (thiosaccharine) and 0.04 g (0.001 mol) NaOH in methanol (3 ml). The solution thus obtained was heated at reflux for 5 h. The crude product obtained after evaporating the solvent was used without purification in the next step of the synthesis.

#N/A

Reference£º
Patent; ADAMED, Sp. z.o.o.; US2006/160870; (2006); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.24340-77-0,4-Bromoisothiazole,as a common compound, the synthetic route is as follows.

General procedure: 2 wt% DL-alpha-Tocopherolmethoxypolyeneglycol succinate solution (1.5 mL) was added to a mixture of 5-methoxycarbonylbenzofuran-2-MIDA boronate (200 mg, 0.604 mmol), (dtbpf)PdCl2 (32 mg, 0.048 mmol) and bromobenzene (95 mg, 0.604 mmol) under N2. Et3N (0.25 mL, 1.81 mmol) was added to thesuspension under N2. The reaction mixture was vigorously stirred at 40 C for 22 h under N2. Theresulting mixture was diluted with water to form a precipitate, which was filtered, washed with water anddissolved with CHCl3. The obtained organic solutions were dried over Na2SO4 and concentrated. Theresidue was purified by flash chromatography (SiO2, AcOEt : hexane = 30 : 70) to give 143.0 mg (94%)of white powde;

As the paragraph descriping shows that 24340-77-0 is playing an increasingly important role.

Reference£º
Article; Sakurai, Yohji; Heterocycles; vol. 94; 7; (2017); p. 1322 – 1336;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

87691-88-1, 3-Piperazinobenzisothiazole hydrochloride is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of the product from step C above (5.0016 g, 17.476 mmol), 3-piperazin-1-yl-benzo[d]isothiazole hydrochloride (4.4811 g, 17.520 mmol), potassium carbonate (4.8299 g, 34.946 mmol) and potassium iodine (0.2903 g, 1.749 mmol) were reacted in acetonitrile (29.0 mL) in a CEM MARS5 microwave reactor for 1 h at 200 C. The reaction was cooled to room temperature, diluted with H2O and filtered. The solid was washed with H2O and hexanes. The resulting solid was purified by MPLC [silica gel, 100 % methylene chloride (CH2CI2) to 3 % MeOH/CH2CI2 over 1 h, then hold at 3 % MeOH/CH2CI2] to give 5.6591 g, (12.065 mmol, 69 %) of the titled compound as an off-white crystalline solid. LC-MS (APCI): (M-1)+ = 469.1, (M+1)+ = 471.0

87691-88-1 3-Piperazinobenzisothiazole hydrochloride 11521711, aisothiazole compound, is more and more widely used in various.

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC; WO2004/26864; (2004); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.18480-53-0,3,4-Dichloroisothiazole-5-carboxylic acid,as a common compound, the synthetic route is as follows.

In a 250 ml single-mouth round bottom flask, 7.8 g of 3,4-dichloroisothiazole-5-carboxylic acid and 50 ml of thionyl chloride were added.The NaOH lye was inserted above the return pipe to absorb volatile thionyl chloride and refluxed at 80¡ãC for 5 hours.The solution turns light yellowRemove unreacted thionyl chloride by atmospheric pressure at 74¡ãC,Then vacuum distillation to collect 128 ¡ãCThe fraction yielded 5.9 g of colorless 3,4-dichloroisothiazole-5-formyl chloride,Using the resulting pure product to calculate the yield,Yield 69.3percent;

The synthetic route of 18480-53-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Nankai University; Fan Zhijin; Zong Guangning; Ma Liuyong; Li Fengyun; Zhu Yujie; Chen Lai; Wang Haixia; Qian Xiaolin; Guo Xiaofeng; Pei Yu; Xu Jinghua; (21 pag.)CN104974150; (2018); B;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

24340-77-0, 4-Bromoisothiazole is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a reaction flask were added compound 5 (200 mg, 0.392 mmol), 4-bromoisothiazole (96 mg, 0.588 mmol), Pd(dppf)Cl2 (32 mg, 0.02 mmol) and sodium carbonate (126 mg, 1.18 mmol), 2 mL glycol dimethyl ether and 0.4 mL water were added, bubbled with nitrogen gas for 10 minutes, and the reaction was heated to 120 C in microwace for half an hour. After TLC detected the reaction was complete, the reaction was concentrated, purified by silica gel column chromatography to afford 58 mg of a product, yield: 31.7%. LC-MS(APCI): m/z = 467.3(M+1)+; 1H NMR (400 MHz, DMSO) delta 10.17 (s, 1H), 9.04 (s, 1H), 8.76 (d, J = 2.3 Hz, 1H), 8.70 (s, 1H), 8.05 (d, J = 2.3 Hz, 1H), 7.86 (d, J = 9.1 Hz, 2H), 7.33 (d, J = 8.8 Hz, 2H), 4.86 (d, J = 3.4 Hz, 1H), 4.21 (s, 1H), 3.41 (dd, J = 17.0, 9.3 Hz, 1H), 3.29 – 3.18 (m, 2H), 2.90 (d, J = 11.1 Hz, 1H), 1.89 – 1.80 (m, 1H), 1.75 (s, 1H).

The synthetic route of 24340-77-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Shenzhen Targetrx, Inc.; WANG, Yihan; ZHAO, Jiuyang; AL, Yixin; (51 pag.)EP3553057; (2019); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

677304-75-5, 6-Bromobenzo[d]isothiazole-3-carboxylic acid is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 3: DIEA (11.7 mL, 67.4 mmol) and HBTU (7.03 g, 18.5 mmol) were added to a solution of 6-bromobenzo[d]isothiazole-3-carboxylic acid (4.35 g, 16.9 mmol) and N,O-dimethylhydroxylamine hydrochloride (2.14 g, 21.9 mmol) in DMF (100 mL). The reaction was stirred at room temperature for 2 hours. The mixture was partitioned between water and EtOAc. The organic layer was washed with aqueous NaHCO3 solution and brine, dried and concentrated. The residue was purified by column chromatography (hexane:EtOAc, 3:1) to give 6-bromo-N-methoxy-N-methylbenzo[d]isothiazole-3- carboxamide (4.60 g, 91%) as a solid. 1H NMR (CDCl3, 400 MHz) delta 8.12 (m, 2H), 8.59 (d, J = 8.8 Hz, IH), 3.83 (s, 3H), 3.49 (s, 3H).

The synthetic route of 677304-75-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ARRAY BIOPHARMA INC.; GENENTECH, INC.; WO2009/89462; (2009); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com