Tag: M.W:100-200

It is a common heterocyclic compound, the isothiazole compound, Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, cas is 27148-03-4 its synthesis route is as follows.

General procedure: Thiosaccharin (Htsac) (0.070 g, 0.353 mmol) in MeOH (5 cm3)was added to a suspension of 1 (0.150 g, 0.353 mmol) in CHCl3(8 cm3). The mixture was stirred for 3 h and refluxed on a steambath for 10 min. The orange-red solid thus formed was collected,washed with EtOH and dried in a vacuum oven (yield: 0.128 g,79%). Anal. Calc. for C14H8N2O3PdS3: C, 36.97; H, 1.77; N, 6.16.Found: C, 37.12; H, 1.96; N, 6.30%. IR (KBr); 3049w, 1632s,1562m, 1443m, 1423m, 1016m, 804m, 439m, 413m cm1. 1HNMR (d6-dmso): d 7.95 (d, J 8.1, 1H, tsac), 7.89-7.73 (m, 5H, tsac& bit), 7.6 (t, J 7.5, 1H, bit), 7.41 (t, J 7.5, 1H, bit) ppm.Decomposes at 282 C.

27148-03-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,27148-03-4 ,Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Al-Jibori, Subhi A.; Ahmed, Birgul S.M.; Ahmed, Safaa A.; Karada?, Ahmet; Schmidt, Harry; Wagner, Christoph; Hogarth, Graeme; Inorganica Chimica Acta; vol. 436; (2015); p. 7 – 15;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

936-16-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, cas is 936-16-3,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

2-Chloro-4-(4-Boc-piperazin-l-yl)quinazoline (140 mg, 0.40 mmol), 253-dihydro-l,2- benzisothiazole l5l-dioxide (85 mg, 0.50 mmol) and potassium carbonate (110 mg, 0.80 mmol) in DMSO (2 ml) were heated at 90¡ã for 16 h and then at 110¡ã for 5 h. The reaction mixture was diluted with brine and extracted with dichloromethane (x3). The combined o organic phases were dried (MgSO4) and evaporated to dryness. The residue was dissolved in dichloromethane (2 ml) and TFA (0.5 ml) was added. The reaction mixture was stirred at ambient temperature for 16 h. The solvent was evaporated and the crude was purified by preparative HPLC to give the acetate of the title compound (71 mg, 40percent). 1H NMR (400 MHz, DMSO-J6) d ppm 7.90 – 8.02 (2 H, m) 7.61 – 7.84 (5 H, m) 7.33 – 7.41 (1 H3 m) 5.19 (2 H, s) 3.79 – 3.88 (4 H, m) 2.87 – 2.95 (4 H, m); ESI-MS m/z M+H+ 382.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, 936-16-3

Reference£º
Patent; ASTRAZENECA AB; WO2007/108744; (2007); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

7716-66-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Chlorobenzo[d]isothiazole, cas is 7716-66-7,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

3-Chloro-1 ,2-benzisothiazole (147 mg, 0.87 mmol) was added to a solution of the piperidine of preparation 60 (200 mg, 0.72 mmol) in acetonitrile (20 mi). 1 ,8-Diazabicyclo[5.4.0]undec-7-ene (111 mul, 0.72 mmol) was added, and the reaction mixture was then stirred at room temperature for 48 hours. It was then concentrated under reduced pressure and the crude product was purified by EPO column chromatography on silica gel using dichloromethane/methanol/aqueous ammonia as eluant (90:10:1 v/v/v) to yield the title compound (290 mg, 98percent) as a solid.1H NMR (400MHz, CD3OD): delta 1.80-1.85 (m, 2H), 2.00-2.10 (m, 2H), 2.23 (s, 3H), 2.57 (m, 1 H), 2.85-2.91 (m, 2H), 3.23-3.28 (m, 2H), 7.32 (t, 1 H), 7.43 (d, 2H), 7.61-7.68 (m, 4H), 7.74 (d, 1 H); LRMS APCI+ m/z 410 [MH]+.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3-Chlorobenzo[d]isothiazole, 7716-66-7

Reference£º
Patent; PFIZER LIMITED; WO2006/114706; (2006); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

7716-66-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Chlorobenzo[d]isothiazole, cas is 7716-66-7,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

3-Chlorobenzo[d]isothia-zole (300 mg, 3.0 mmol) was dissolved in propane- 1,3 -diamine (3 mL) and heated at 8O0C for 3 h. The reaction mixture was cooled to room temperature, poured into water and extracted with ethyl acetate. The organic extract was dried over anhydrous sodium sulfate, filtered and the filtrate concentrated under reduced pressure to yield ^-(benzotdJisothiazol-S-ytypropane- 1,3-diamine as a yellow solid, (530 mg). 1H NMR (300 MHz, CDCl3): 7.8 (m, IH), 7.7 (m, IH), 7.5 (m, 2H), 7.3 (m, IH), 3.7 (m, 2H), 2.9 (t, 2H), 1.9 ppm (m, 2H).

The chemical industry reduces the impact on the environment during synthesis,7716-66-7,3-Chlorobenzo[d]isothiazole,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; RIGEL PHARMACEUTICALS, INC.; WO2006/91858; (2006); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

18480-53-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3,4-Dichloroisothiazole-5-carboxylic acid, cas is 18480-53-0,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

To a suspension of 3,4-dichloroisothiazole-5-carboxylic acid (0.15 g, 0.76 mmol) in oxalyl chloride (2 mL) was added a catalytic amount of dimethylformamide (2 drops) and the mixture was heated to 80¡ã C. and stirred for 2 h. The excess oxalyl chloride was removed on the rotary evaporator. Meanwhile, 5-fluoro-2-(4-fluorobenzyloxy)-pyrimidin-4-ylamine (0.17 g, 0.68 mmol) was dissolved in THF (1 mL), treated with LiHMDS (1M in THF, 0.76 mL, 0.76 mmol) and stirred for 10 min. The freshly prepared 3,4-dichlorothiazole-5-carbonyl chloride*, dissolved in THF (1 mL), was added and the reaction was capped and stirred for 12 h. The reaction was diluted with water and the target compound was extracted with CH2Cl2 (3.x.5 mL). The combined extracts were dried over MgSO4 and then evaporated under reduced pressure. The mixture was eluted with CH2Cl2 through an anionic-exchange solid phase extraction column and then further purified by reverse-phase chromatography to give 3,4-dichloroisothiazole-5-carboxylic acid [5-fluoro-2-(4-fluorobenzyloxy)pyrimidin-4-yl]amide (0.035 g, 12percent) as a tan solid: mp 87-90¡ã C.; 1H NMR (400 MHz, DMSO-d6) delta 11.78 (s, 1H), 8.67 (s, 1H), 7.51-7.48 (m, 2H), 7.24-7.19 (m, 2H), 5.25 (s, 2H); MS (ESI) m/z 417 (M+H)+, 415 (M-H)-. *Nagata, T.; Kogure, A.; Yonekura, N.; Hanai, R.; Kaneko, I.; Nakano, Y. JP 2007211002 A

The chemical industry reduces the impact on the environment during synthesis,18480-53-0,3,4-Dichloroisothiazole-5-carboxylic acid,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; DOW AGROSCIENCES LLC; US2009/203647; (2009); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 27148-03-4, its synthesis route is as follows.

A solution of Htsac (0.035 g, 0.18 mmol) in MeOH was added toa solution of 1 (0.10 g, 0.18 mmol) in CHCl3 (10 cm3). The mixturewas stirred for 2 h and the resulting pale brown solid was collectedand dried in vacuum. Yield 0.116 g, 90%. Anal. Calc. for C25H28ClN3-O2Pd2S2: C, 42.0, H, 4.0, N, 5.9. Found: C, 42.2, H, 4.0, N, 5.7. Molarconductivity (DMSO): 0.30 (X-1 mol1 cm1). IR: 3083w, 2916w,1558 m, 1453vs, 1317 s, 1168 s, 1020 s, 815 s, 449w, 362 s cm1.1H NMR (DMSO d6): d 8.12-8.10 (dd, J 7.2, 1.2 2H, Ph), 7.97-7.95(m, 1H, Ph), 7.84-7.82 (m, 2H, Ph), 7.60 (d, J 7.2, 1H, Ph), 7.47 (d, J 7.2, 1H, Ph), 7.05-6.91 (m, 5H, Ph), 6.82 (d, J 7.2, 1H, Ph), 4.02(s, 4H, CH2), 2.72 (s, 12H, 4CH3). Mp: 202-204 C.

27148-03-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,27148-03-4 ,Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Al-Jibori, Subhi A.; Hameed, Wisam J.; Al-Janabi, Ahmed S.; Basak-Modi, Sucharita; Wagner, Christoph; Hogarth, Graeme; Inorganica Chimica Acta; vol. 479; (2018); p. 197 – 202;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

18480-53-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3,4-Dichloroisothiazole-5-carboxylic acid, cas is 18480-53-0,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

A mixture of 3,4-dichloroisothiazole-5-carboxylic acid (2.0 g) and toluene (20 mL) was treated with thionyl chloride (5.0 ml_) and lambda/,lambda/-dimethylformamide (0.5 mL), and the resulting mixture was heated at 1000C for 16 hours. The mixture was concentrated under reduced pressure and the residue was dissolved in tetrahydrofuran (5.0 mL). The mixture was cooled to -780C and treated dropwise over a period of 1 hour with a 2.0 M solution of sodium borohydride in lambda/,lambda/-dimethylformamide (8.5 mL). The mixture was stirred at – 780C for 5 minutes, diluted with 1.0 M aqueous hydrochloric acid solution and extracted with ethyl acetate. The combined organic extract was washed with saturated aqueous sodium chloride solution, dried over sodium sulfate and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel, eluting with a mixture of cyclohexane and dichloromethane (1:0 to 0:1 by volume) to afford the title compound as a pale yellow solid (1.1 g).1H NMR (CDCI3): delta 4.96 (s, 2H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3,4-Dichloroisothiazole-5-carboxylic acid, 18480-53-0

Reference£º
Patent; ARGENTA DISCOVERY LIMITED; WO2009/77728; (2009); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

24340-77-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4-Bromoisothiazole, cas is 24340-77-0,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

Intermediate 58: Methyl 6-(benzenesulphonylmethyl)-3-(isothiazol-4-yl)-2-methoxybenzoate[0588] A mixture of methyl 6-(benzenesulphonylmethyl)-2-methoxy-3-(4,4,5,5- tetramethyl-l,3,2-dioxaborolan-2-yl)benzoate (Intermediate 59, 0.15g), tri-tert-butyl- phosphinium tetrafluoroborate (O.Olg), cesium carbonate (0.34g), tris-(dibenzylideneacetone)- dipalladium (0.016g), and 4-bromoisothiazole (0.06g) in dioxane (3.2ml) and water (0.4ml) was degassed and then heated in the microwave at 120C for 20 minutes. After cooling, the mixture was diluted with ether, dried (MgS04) and filtered. The filtrate was evaporated to dryness and the residue was purified by chromatography on silica, eluting with a mixture of ethyl acetate and cyclohexane with a gradient of 0-60% to give crude methyl 6- (benzenesulphonylmethyl)-3-(isothiazol-4-yl)-2-methoxy-benzoate (0..044g) as an oil. The material was used without further purification or characterisation.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4-Bromoisothiazole, 24340-77-0

Reference£º
Patent; ZAFGEN CORPORATION; DYKE, Hazel, Joan; CRAMP, Susan, Mary; PALLIN, Thomas, David; KULAGOWSKI, Janusz, Jozef; MONTANA, John, Gary; ZAHLER, Robert; WO2011/44506; (2011); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

18480-53-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3,4-Dichloroisothiazole-5-carboxylic acid, cas is 18480-53-0,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

(3,4-dichloroisothiazol-5-yl)methanolA solution of 3,4-dichloroisothiazole-5-carboxylic acid (2.0 g), N1N- dimethylformamide (few drops) and thionyl chloride (20 mL) in toluene (60 mL) was heated at 1000C for 16 hours. The reaction mixture was cooled to room temperature and concentrated under reduced pressure. The residue was dissolved in tetrahydrofuran (20 mL), cooled to -200C under a nitrogen atmosphere and treated dropwise with a 1.0 M sodium borohydride solution in N, N- dimethylformamide (8.5 ml.) over 1 hour. The mixture was stirred for 5 minutes after the end of addition and quenched with 1.0 M aqueous hydrochloric acid solution. The mixture was concentrated to low bulk under reduced pressure and extracted with ethyl acetate. The combined organic layer was washed with brine, dried over magnesium sulfate and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel, eluting with a mixture of cyclohexane and dichloromethane (1 :0 to 0:1 by volume), to afford the title compound as a pale yellow solid (1.1 g).1H NMR (300 MHz, CDCI3): delta 2.60 (s, 1H); 4.96 (s, 2H).

The chemical industry reduces the impact on the environment during synthesis,18480-53-0,3,4-Dichloroisothiazole-5-carboxylic acid,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; PULMAGEN THERAPEUTICS (ASTHMA) LIMITED; HYND, George; MONTANA, John Gary; FINCH, Harry; ARIENZO, Rosa; AHMED, Shahadat; WO2010/142934; (2010); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is 3-Bromoisothiazole, and cas is 55512-82-8, its synthesis route is as follows.

Intermediate 123d was reacted with 3-bromoisothiazole in a method analogous to Example 122 to give Example 123 (5.9 mg, 11.5 muiotaetaomicron, 46percent). LC-MS (Method Al) RT = 1.39 min, MS (ESI) m/z: 512.4 (M+H)+. H NMR (500 MHz, DMSO-cfe) delta 9.18 (d, 7=4.6 Hz, 1H), 8.12 (br d, 7=7.9 Hz, 1H), 8.09 – 8.01 (m, 2H), 7.75 (br d, 7=7.9 Hz, 1H), 7.17 (br d, 7=7.9 Hz, 2H), 7.07 (br d, 7=7.9 Hz, 2H), 4.68 (s, 2H), 2.32 (t, 7=7.6 Hz, 2H), 1.90 – 1.77 (m, 6H), 1.67 (br d, 7=6.7 Hz, 2H), 1.49 (quin, 7=7.5 Hz, 2H), 1.27 (dq, 7=14.9, 7.4 Hz, 2H), 0.81 (t, 7=7.3 Hz, 3H) (1 exchangeable proton not observed).

55512-82-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,55512-82-8 ,3-Bromoisothiazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; UNIVERSITE DE MONTREAL; BRISTOL-MYERS SQUIBB COMPANY; PRIESTLEY, Eldon, Scott; REZNIK, Samuel, Kaye; RUEDIGER, Edward, H.; GILLARD, James, R.; HALPERN, Oz, Scott; JIANG, Wen; RICHTER, Jeremy; RUEL, Rejean; TRIPATHY, Sasmita; YANG, Wu; ZHANG, Xiaojun; (642 pag.)WO2018/5591; (2018); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com