Tag: M.W:100-200

Name is 4-Bromoisothiazole, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 24340-77-0, its synthesis route is as follows.

A solution of 5,7-dimethyl-N-(4-(4,4,5,5-tetramethyl-l,3,2-dioxaborolan-2- yl)phenyl)pyrazolo[l,5-a]pyrimidine-3-carboxamide 6 (286 mg, 0.73 mmol) in DMF (5 mL) was charged with 4-bromoisothiazole (100 mg, 0.60 mmol), potassium acetate (179 mg, 1.8 mmol) and Pd(dppf)Cl2DCM adduct (49 mg, 0.06 mmol) under argon at room temperature. The reaction mixture was heated to 100C for 16 h. The reaction mixture was quenched with water (5 mL), extracted with ethyl acetate (3 X 10 mL) and concentrated under vacuum to obtain crude compound. The crude compound was purified by FCC (eluent, 3-5% methanol in DCM) to afford the title compound as an off-white solid (50 mg, 23%).XH NMR (400 MHz, CDCI3) delta 10.24 (s, 1H), 8.79 (s, 1H), 8.71 (s, 1H), 8.68 (s, 1H), 7.84 (d, J=8.57 Hz, 2H), 7.61 (d, J=8.57 Hz, 2H), 6.78 (s, 1H), 2.83 (s, 3H), 2.74 (s, 3H). ES-MS m/z 350.20 (M+H)+. HPLC purity 99.1%.

24340-77-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,24340-77-0 ,4-Bromoisothiazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; LYSOSOMAL THERAPEUTICS INC.; SKERLJ, Renato, T.; LANSBURY, Peter, T.; GOOD, Andrew, C.; BOURQUE, Elyse, Marie Josee; (139 pag.)WO2016/73895; (2016); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is Isothiazole-5-carboxylic acid, and cas is 10271-85-9, its synthesis route is as follows.

General procedure: The target compounds were synthesized using the procedure given in literature by refluxing aryl/heteroaryl acids with carbohydrazide 4a or 4b in phosphorous oxychloride. The reaction was monitored with the help of TLC to check its completion. After completion of reaction, the mixture was poured over crushed ice and allowed to precipitate. The precipitate was vacuum filtered, dried and recrystallized from methanol. Column chromatography was done on using n-hexane: ethylacetate mixture (7:3). Solvent was evaporated invacuo using rotary evaporator to obtain pure product.

10271-85-9, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,10271-85-9 ,Isothiazole-5-carboxylic acid, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Rane, Rajesh A.; Bangalore, Pavankumar; Borhade, Sheetal D.; Khandare, Preeti K.; European Journal of Medicinal Chemistry; vol. 70; (2013); p. 49 – 58;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

7716-66-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Chlorobenzo[d]isothiazole, cas is 7716-66-7,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

PREPARATION 3 3-(1-Piperazinyl)-1,2-benzisothiazole ¡¤ hydrochloride Anhydrous piperazine (49.4 g, 0.57 mol) and t-butanol (10 mL) were added to a dry, 300 mL round bottom flask equipped with a mechanical stirrer, thermometer, condenser topped with a nitrogen inlet, and pressure-equalizing dropping funnel. After the flask was purged with nitrogen, it was heated to 100 C. in an oil bath. A solution of 3-chloro-1,2-benzisothiazole (19.45 g, 0.11 mol) in t-butanol (10 mL) was added to the addition funnel, and then slowly added to the reaction flask over 20 minutes to moderate an exothermic reaction (112-118 C.). Once addition was complete the yellow solution was heated to reflux (121 C.) and then maintained at reflux for 24 hours. Thin-layer chromatography showed that the reaction was complete. The reaction mixture was cooled to 85 C. and 120 mL of water was added. The hazy solution was filtered and the filter cake rinsed with 60 mL of t-butanol/water (1:1) solution. The pH of the combined filtrate and wash was adjusted to 12.2 with 50% aqueous caustic. The aqueous solution was extracted with toluene (200 mL), the layers were separated, and the aqueous layer was extracted with fresh toluene (100 mL). The combined toluene layers were washed with water (75 mL), and then the toluene solution was concentrated in vacuo at 48 C. to 90 mL. Isopropanol (210 mL) was added to the concentrate and then the pH was slowly adjusted to 3.8 with 7.6 mL of concentrated hydrochloric acid. The resulting slurry was cooled to 0 C., granulated for 45 min, and then filtered. The filter cake was washed with cold isopropanol (50 mL) and then dried in vacuo at 40 C. to afford 23.59 g (80% yield) of 3-(1-piperazinyl)-1,2-benzisothiazole hydrochloride as an off white solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3-Chlorobenzo[d]isothiazole, 7716-66-7

Reference£º
Patent; Pfizer Inc.; US5935960; (1999); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

27148-03-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, cas is 27148-03-4,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

The [Zn(tsac)2(o-phen)] complex was prepared by addition of a dissolution of Zn(NO3)26H2O (14.85 mg, 0.049 mmol, 2 ml) into a thiosaccharine solution (20 mg, 0.1 mmol/ethanol:water 1:1,2 ml). A o-phenantroline solution was finally added drop by drop (ethanol:water 1:1, 2 ml) and a yellow power was obtained. The resulting yellow solid was filtered and washed with cold water. Crystals suitable for X-ray diffraction studies were produced by slow diffusion of diethyl ether to the mother solution. Yield: 74% Molar Conductivity (mS M1) = 22.4. Calculated analytical percent composition for C26H16N4O4S4Zn: C = 48.516%; H = 2.267%; N =8.592%; Found: C = 48.638%; H = 2.511%; N = 8.725%. Soluble indimethyl sulfoxide and dimethyl formamide. Non-soluble in other solvents (methanol, chloroform, dichloromethane, acetone, water). UV-Visible [DMSO, kmax nm]: 341. 1HNMR (300 MHz,DMSO) d 8.72-9.21 (m, 1H), 8.94 (m, 1H), 8.31(m, 1H), 8.03-8.21 (m, 1H), 7.91 (m, 1H), 7.57-7.72 (m, 3H). 13CNMR (75 MHz, DMSO) d 191.81 (C1), 149.09 (C8), 140.02 (C10), 139.36(C12), 137.94 (C7), 136.52 (C2), 132.12 (C4), 130.91 (C5), 128.70 (C11), 127.37 (C13), 125.10 (C3), 125.81 (C9), 119.03 (C6).

The chemical industry reduces the impact on the environment during synthesis,27148-03-4,Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Delgado, Fermin; Freire, Eleonora; Baggio, Ricardo; Gonzalez Pardo, Veronica; Dorn, Viviana; Dennehy, Mariana; Inorganica Chimica Acta; vol. 479; (2018); p. 266 – 274;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

7716-66-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Chlorobenzo[d]isothiazole, cas is 7716-66-7,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 3-chlorobenzo[d]isothiazole (0.5 00 g, 2.941 mmol) in sulphuric acid (5 mL) was added potassium nitrate (272 mg, 2.69 mmol) portion wise at 0-5¡ãC. The reaction mass was stirred at rt for 12 h. The reaction mass was quenched with water and the precipitate obtained was filtered. The precipitate was purified by column chromatography to afford 220 mg of the title product. 1H NMR (300 MHz, CDC13): delta 8.59 (d, J = 7.8 Hz, 1H), 8.40 (d, J = 7.8 Hz, 1H), 7.76 (t, / = 7.8 Hz, 1H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3-Chlorobenzo[d]isothiazole, 7716-66-7

Reference£º
Patent; GLENMARK PHARMACEUTICALS S.A.; GHARAT, Laxmikant Atmaram; BANERJEE, Abhisek; PAWAR, Mahesh Yashwant; KHAIRATKAR-JOSHI, Neelima; KATTIGE, Vidya Ganapati; WO2013/38308; (2013); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

It is a common heterocyclic compound, the isothiazole compound, 3-Chlorobenzo[d]isothiazole, cas is 7716-66-7 its synthesis route is as follows.

Preparation Example 20: 3-(4-(Benzo[d]isothiazoI-3-yl)piperazin-l- yl)propan-l-amine dihydrochloride; A mixture of piperazine (10.2 g, 0.118 mmol) and 3-chloro-l ,2- benzisothiazole (4.0 g, 0.024 mmol) in t-BuOH (4 mL) was refluxed overnight. The reaction mixture was poured into water (100 mL) and extracted with toluene (200 mL). The organic phase was dried over MgSO4 and evaporated until about 20 mL remained, under vacuum. The resulting suspension was cooled at 0-5 0C overnight. The precipitate was filtered and dried under vacuum to provide 3-(piperazin- l-yl)benzo[d]isothiazole as an intermediate (3.36 g, 15.4 mmol, 65 percent). MH+ 220A mixture of 3-(piperazin-l-yl)benzo[-i]isothiazole (1.75 g, 8.0 mmol), N-(3-bromopropyl)-phthalimide (1.96 mmol, 7.3 mmol) and K2CO3 (2.21 g, 16.0 mol) in DMF (10 mL) was stirred at 80 0C for 3 hours. The reaction mixture was poured into water (100 mL) and extracted with ethyl acetate (150 mL). The organic phase was dried over MgSO4 and evaporated under vacuum. The residue was further purified by flash column chromatography to provide 2-(3-(4- (benzo[d]isothiazol-3-yl)piperazin-l-yl)propyl)isoindoline-l ,3-dione as an intermediate (1.49 g, 3.67 mmol, 50 percent).To a solution of 2-(3-(4-(benzo[y]isothiazol-3-yl)piperazin-l- yl)propyl)isoindoline- l ,3-dione (1.49 g, 3.67 mmol) in EtOH (25 mL) was added Hydrazine monohydrate (2.5 mL). The mixture was stirred at 80 0C for 1-2 hours and cooled to room temperature. The reaction mixture was poured into water (100 mL) and extracted with DCM (150 mL). The organic phase was dried over MgSO4 and evaporated under vacuum. The residue was redissolved in ether (20-30 mL) and HCl solution (3 mL, 2M in ether) was added to the solution. The resulting precipitate was collected on a filter funnel and dried under vacuum to provide the title compound as HCl salt form (1.1 g, 3.15 mmol, 86 percent).1R NMR (400 MHz, CD3OD3) delta 8.04 (d, J = 8.4 Hz, IH), 7.94 (d, J = 8.0 Hz, IH), 7.55 (t, J = 7.2 Hz, IH), 7.45 (t, J = 7.6 Hz, IH), 4.24- 4.14 (br, 2H), 3.85 (t, J = 7.2 Hz, IH), 3.76-3.66 (br, 2H), 3.59-3.32 (m, 9H), 3.08 (t, J = 7.6 Hz, IH), 2.34-2.30 (m, IH), 2.25-2.17 (m, 2H).MH+ 277

7716-66-7, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7716-66-7 ,3-Chlorobenzo[d]isothiazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; GREEN CROSS CORPORATION; LEE, Jinhwa; KANG, Suk Youn; PARK, Eun-Jung; SONG, Kwang-Seop; KIM, Min Ju; SEO, Hee Jeong; LEE, Suk Ho; KIM, Jeongmin; PAE, Ae Nim; PARK, Woo-Kyu; WO2010/38948; (2010); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

24340-77-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4-Bromoisothiazole, cas is 24340-77-0,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

(B) (2E)-Ethyl 3-(4-(isothiazol-4-yl)pyridin-3-yl)acrylate A mixture of (2E)-ethyl 3-(4-(tributylstannyl)pyridin-3-yl)acrylate (33 mg), 4-bromoisothiazole (17.41 mg), Pd(Ph3P)4 (8.18 mg), copper(I) iodide (2.70 mg), cesium fluoride (21.50 mg) and DMF (1.5 mL) was stirred under nitrogen atmosphere at 100 C. for 13 hours. Likewise, a mixture of (2E)-ethyl 3-(4-(tributylstannyl)pyridin-3-yl)acrylate (497 mg), 4-bromoisothiazole (262 mg), Pd(Ph3P)4 (123 mg), copper(I) iodide (40.6 mg), cesium fluoride (324 mg) and DMF (10 mL) was stirred under nitrogen atmosphere at 100 C. for 13 hours. The reaction mixtures were combined, and the insoluble matter was then filtered. The filtrate was diluted with ethyl acetate (20 mL), water (10 mL) and saturated aqueous sodium bicarbonate solution (10 mL), and the aqueous layer was extracted with ethyl acetate. The extract was washed with water and brine and then dried over anhydrous sodium sulfate, and the solvent was distilled off under reduced pressure. The residue was purified by silica gel column chromatography (ethyl acetate/hexane) to obtain the title compound (222 mg). MS: [M+H]+ 260.9.

The chemical industry reduces the impact on the environment during synthesis,24340-77-0,4-Bromoisothiazole,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Takeda Pharmaceutical Company Limited; HIRAYAMA, Takaharu; FUJIMOTO, Jun; CARY, Douglas Robert; OKANIWA, Masanori; HIRATA, Yasuhiro; (147 pag.)US2017/44132; (2017); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, and cas is 936-16-3, its synthesis route is as follows.

2,3-dihydro-1,1-dioxo-1,2-benzoisothiazole (150 mg, 0.887 mmol), N-Boc-bromoethylamine (238mg, 1.064mmol) And cesium carbonate (867mg, 2.66mmol) in 5ml DMF, It was then stirred overnight. On the following day, after the reaction was detected by TLC, water was added for extraction. It was washed with saturated brine and dried over anhydrous sodium sulfate. Suction filtration, the filtrate was concentrated under reduced pressure, the crude product was separated by column chromatography, 124 mg of a white solid were obtained with a yield of 45%.

936-16-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,936-16-3 ,2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Chinese Academy Of Sciences Shanghai Pharmaceutical Institute; Zhang Ao; Meng Linghua; Ding Jian; Chen Shulun; Ding Chunyong; Guo Wei; (26 pag.)CN110143955; (2019); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, and cas is 27148-03-4, its synthesis route is as follows.

General procedure: For 6: A solution of thiosaccharin (tsacH) (0.06 g, 0.307 mmol) in chloroform (8 cm3) was added to a solution of [PtCl2(kappa2-dppm)] (0.10 g, 0.154 mmol) in chloroform (10 cm3). A few drops of triethylamine were added and the resulting mixture was heated under reflex for 1 h. This produced a yellow solution was filtered off and reduced to half volume. Methanol (2 cm3) was added and the mixture was set a side to evaporate slowly at room temperature. The yellow crystalline solid thus formed was filtered off and dried in a vacuum oven (0.12 g, 91%).

27148-03-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,27148-03-4 ,Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Al-Jibori, Subhi A.; Al-Jibori, Mohamed H.S.; Hogarth, Graeme; Inorganica Chimica Acta; vol. 398; (2013); p. 117 – 123;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

936-16-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, cas is 936-16-3,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

To a solution of {5-(4-fluorophenyl)-1-isobutyl-1H-pyrazol-3-yl}methanol (19.4 mg, 0.078 mmol) in methylene chloride (1 mL) were added PPh3 (42.8 mg, 0.163 mmol) and CBr4 (66.3 mg, 0.200 mmol) at 0¡ã C., followed by stirring at the same temperature for 30 minute to give {5-(4-fluorophenyl)-1-isobutyl-1H-pyrazol-3-yl}methyl bromide. When the reaction was completed as measured by TLC (Hexane:EtOAc=2:1), drops of 1,2-benzisothiazoline-1,1-dioxide (24.3 mg, 0.078 mmol) N,N-dimethylformamide (1.5 mL) were slowly added to the solution. (0338) Then, potassium carbonate (113 mg, 0.816 mmol) were added at the same temperature, and the resulting solution was stirred for a day. When the reaction was completed as measured by TLC (Hexane:EtOAc=2:1), water was added, after which extraction was carried out with ethyl acetate and brine. The organic layer thus formed was dried over anhydrous magnesium sulfate, filtered, and concentrated in vacuo. The concentrate was purified by column chromatography (Hexane:EtOAc=2:1) to afford the title compound (19.2 mg, 62percent percent, white solid). (0339) M.P. 110.8-118.2¡ã C.; (0340) 1H NMR (300 MHz, CDCl3) delta 7.61-7.52 (m, 2H), 7.46-7.33 (m, 4H), 7.18-7.12 (m, 2H), 6.41 (s, 1H), 4.56 (s, 2H), 4.41 (s, 2H), 3.91 (d, J=7.5 Hz, 2H), 2.26-2.08 (m, 1H), 0.80 (d, J=6.7 Hz, 6H); (0341) 13C NMR (75 MHz, CDCl3) delta 146.0, 144.5, 136.8, 135.2, 134.0, 133.0, 132.6, 131.0, 130.8, 129.2, 129.1, 124.8, 124.5, 121.4, 115.9, 115.6, 106.3, 56.7, 49.9, 45.7, 41.2, 29.6, 19.8

The chemical industry reduces the impact on the environment during synthesis,936-16-3,2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; KOREA INSTITUTE OF SCIENCE AND TECHNOLOGY; NAM, Ghil Soo; CHOI, Kyung Il; KIM, Jung Hyun; PAE, Ae Nim; HONG, Jin Ri; LEE, Jae Kyun; (30 pag.)US2015/329533; (2015); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com