Tag: M.W:100-200

Name is 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 936-16-3, its synthesis route is as follows.,936-16-3

General procedure: Potassium carbonate was dissolved in DMF, and 1,2-bezeneisothiazolin-1,1-dioxide (8) (1 equiv.) in dichloromethanewas added to the reaction solution, and stirred for overnight. Then,the reaction mixture was filtered through Celite, and washed with1 N HCl and saturated sodium hydrogen carbonate solution. Residualsolution was dried over magnesium sulfate, and concentratedin vacuo, and purified by column chromatography to afford the titlecompound.

With the complex challenges of chemical substances, we look forward to future research findings about 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide

Reference£º
Article in Press; Hong, Jin Ri; Choi, Young Jin; Keum, Gyochang; Nam, Ghilsoo; Bioorganic and Medicinal Chemistry; (2017);,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belong isothiazole compound,3,4-Dichloroisothiazole-5-carboxylic acid,18480-53-0,Molecular formula: C4HCl2NO2S,mainly used in chemical industry, its synthesis route is as follows.,18480-53-0

After 10 g of 50 mmol of 3,4-dichloro-isothiazole carboxylic acid II was added to 100 ml flask was added 30 ml of thionylchloride, refluxed for 5 hours, thionyl chloride was distilled off at atmospheric pressure, the residue was water pump vacuumdistillation at 100-110 degrees C compound fraction collected between 10.6 g yellow solid 3,4-dichloro-isothiazole carboxylicacid chloride III, a yield of 96.3percent, 3,4-dichloro-isothiazole carboxylic acid chloride III prepared a pro rata amount of expanded orreduced, the volume of the reaction vessel according to the corresponding scaled up or down, a commercially availablecompound II has the same effect.

With the synthetic route has been constantly updated, we look forward to future research findings about 3,4-Dichloroisothiazole-5-carboxylic acid,belong isothiazole compound

Reference£º
Patent; Jiangxi Tianren Ecology Co., Ltd.; Nankai University; Chen, Xiaoyan; Liu, Xiping; Fan, Zhijin; Liang, Xiaowen; Li, Yuedong; Mao, Wutao; Li, Juanjuan; Wang, Dun; Wang, Shuhua; Zhou, Lifeng; Ji, Xiaotian; HUA, XUEWEN; (23 pag.)CN102942565; (2016); B;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

4-Bromoisothiazole, cas is 24340-77-0, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,24340-77-0

A mixture of 4-bromo-isothiazole (4.7 g, 28.66 mmol), tert-butyl acrylate (13 mL, 96.96 mmol), Pd(OAc)2 (700 mg, 3.13 mmol), tris-(o-tolyl)phosphine (2.1 g, 6.91 mmol), and TEA (10 g, 99.01 mmol) in 1,4-dioxane (100 mL) was refluxed vigorously under Ar at 125 C. for 2 h. The reaction mixture was cooled to room temperature and concentrated. The residue was purified by silica gel chromatography (PE:EA=15:1 to 10:1) to give tert-butyl (E)-3-isothiazol-4-ylprop-2-enoate (2.7 g, 44.6% yield) as a light yellow solid. LCMS (ESI) [M+Na]+=212.1. 1H NMR (400 MHz, CDCl3): delta 8.72 (s, 1H), 8.69 (s, 1H), 7.63 (d, J=16.0 Hz, 1H), 6.36 (d, J=16.0 Hz, 1H), 1.55 (s, 9H).

With the rapid development of chemical substances, we look forward to future research findings about 4-Bromoisothiazole

Reference£º
Patent; Genentech, Inc.; Chan, Bryan; Daniels, Blake; Drobnick, Joy; Gazzard, Lewis; Heffron, Timothy; Huestis, Malcolm; Liang, Jun; Malhotra, Sushant; Mendonca, Rohan; Rajapaksa, Naomi; Siu, Michael; Stivala, Craig; Tellis, John; Wang, Weiru; Wei, BinQing; Zhou, Aihe; Cartwright, Matthew W.; Gancia, Emanuela; Jones, Graham; Lainchbury, Michael; Madin, Andrew; Seward, Eileen; Favor, David; Fong, Kin Chiu; Good, Andrew; Hu, Yonghan; Hu, Baihua; Lu, Aijun; US2018/282328; (2018); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.822-82-2,Isothiazole-4-carboxylic acid,as a common compound, the synthetic route is as follows.

822-82-2, To a solution of 1,2-thiazole-4-carboxylic acid (10.0 g, 77.4 mmol) in methanol (200 mL) was added drop-wise thionyl chloride (8 mL) and the mixture was stirred at reflux for 2h. The mixture was cooled to RT and the solvent was evaporated to give product as brown solid (11.0 g, 99%).

As the paragraph descriping shows that 822-82-2 is playing an increasingly important role.

Reference£º
Patent; VERNALIS (R&D) LIMITED; BROUGH, Paul Andrew; MACIAS, Alba; ROUGHLEY, Stephen David; WANG, Yikang; PARSONS, Rachel Jane; NORTHFIELD, Christopher John; WO2015/40425; (2015); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is 3-Chlorobenzo[d]isothiazole, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 7716-66-7, its synthesis route is as follows.,7716-66-7

3-Chlorobenzo[d]isothia-zole (300 mg, 3.0 mmol) was dissolved in propane- 1,3 -diamine (3 mL) and heated at 8O0C for 3 h. The reaction mixture was cooled to room temperature, poured into water and extracted with ethyl acetate. The organic extract was dried over anhydrous sodium sulfate, filtered and the filtrate concentrated under reduced pressure to yield ^-(benzotdJisothiazol-S-ytypropane- 1,3-diamine as a yellow solid, (530 mg). 1H NMR (300 MHz, CDCl3): 7.8 (m, IH), 7.7 (m, IH), 7.5 (m, 2H), 7.3 (m, IH), 3.7 (m, 2H), 2.9 (t, 2H), 1.9 ppm (m, 2H).

With the complex challenges of chemical substances, we look forward to future research findings about 3-Chlorobenzo[d]isothiazole

Reference£º
Patent; RIGEL PHARMACEUTICALS, INC.; WO2006/91858; (2006); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7716-66-7,3-Chlorobenzo[d]isothiazole,as a common compound, the synthetic route is as follows.,7716-66-7

Preparation 3 3-(1-Piperazinyl)-1,2-benzisothiazole ¡¤ hydrochloride Anhydrous piperazine (49.4g, 0.57 mol) and t-butanol (10 mL) were added to a dry, 300 mL round bottom flask equipped with a mechanical stirrer, thermometer, condenser topped with a nitrogen inlet, and pressure-equalizing dropping tunnel. After the flask was purged with nitrogen, it was heated to 100C in an oil bath. A solution of 3-chloro-1,2-benzisothiazole (19.45g, 0.11 mol) in t-butanol (10 mL) was added to the addition tunnel, and then slowly added to the reaction flask over 20 minutes to moderate an exothermic reaction (112 – 118C). Once addition was complete the yellow solution was heated to reflux (121C) and then maintained at reflux for 24 hours. Thin-layer chromatography showed that the reaction was complete. The reaction mixture was cooled to 85C and 120 mL of water was added. The hazy solution was filtered and the filter cake rinsed with 60 mL of t-butanol/water (1:1) solution. The pH of the combined filtrate and wash was adjusted to 12.2 with 50% aqueous caustic. The aqueous solution was extracted with toluene (200 mL), the layers were separated, and the aqueous layer was extracted with fresh toluene (100 mL). The combined toluene layers were washed with water (75 mL), and then the toluene solution was concentrated in vacuo at 48C to 90 mL. Isopropanol (210 mL) was added to the concentrate and then the pH was slowly adjusted to 3.8 with 7.6 mL of concentrated hydrochloric acid. The resulting slurry was cooled to 0C, granulated for 45 min, and then filtered. The filter cake was washed with cold isopropanol (50 mL) and then dried in vacuo at 40C to afford 23.59g (80% yield) of 3-(1-piperazinyl)-1,2-benzisothiazole hydrochloride as an off white solid.

The synthetic route of 7716-66-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; PFIZER INC.; EP790236; (1997); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Isothiazole-3-carboxylic acid, cas is 4576-90-3, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,4576-90-3

EXAMPLE 277 Synthesis of (S)-4-((1-benzylpyrrolidin-3-yl)(methyl)amino)-2-fluoro-//-(isothiazol-3-yl)- 5-methylbenzenesulfonamide 2,2,2-trifluoroacetate Step 1. Preparation of te/f-butyl isothiazol-3-ylcarbamate To a slurry of isothiazole-3-carboxylic acid (5.0 g, 38.7 mmol) in terf-butanol (194 mL) was added triethylamine (4.3 g, 42.6 mmol) followed by diphenylphosphoryl azide (11.9 g, 43.3 mmol). The reaction mixture was heated to reflux for 9 hours. Concentration under reduced pressure provided a residue which was dissolved in ethyl acetate (300 mL). The organic layer was washed with water (100 mL), 1 N sodium hydroxide solution (50 mL), water (100 mL), and brine (50 mL). The organic layer was dried over anhydrous magnesium sulfate, filtered, and the filtrate concentrated in vacuo. Purification of the residue by column chromatography, eluting with a gradient of 0 to 10% of ethyl acetate in heptane, provided the title compound as a colorless solid (6.16 g, 79 % yield): H NMR (300 MHz, CDCI3) 9.03-8.98 (m, 1 H), 8.58 (d, J = 4.9 Hz, 1 H), 7.70 (d, J = 4.9 Hz, 1 H), 1.53 (d, J = 0.7 Hz, 9H).

With the rapid development of chemical substances, we look forward to future research findings about Isothiazole-3-carboxylic acid

Reference£º
Patent; XENON PHARMACEUTICALS INC.; ANDREZ, Jean-Christophe; BURFORD, Kristen, Nicole; CHOWDHURY, Sultan; COHEN, Charles, Jay; DEHNHARDT, Christoph, Martin; DEVITA, Robert, Joseph; EMPFIELD, James, Roy; FOCKEN, Thilo; GRIMWOOD, Michael, Edward; HASAN, Syed, Abid; JOHNSON, James, Philip, Jr.; ZENOVA, Alla, Yurevna; (493 pag.)WO2017/201468; (2017); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

1,3-Dihydrobenzo[c]isothiazole 2,2-dioxide, cas is 111248-89-6, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,111248-89-6

To a suspension of 1 ,3-dihydrobenzo[c]isothiazole-2,2-dioxide (280 mg, 1.655 mmol) and potassium carbonate (229 mg, 1.66 mmol) in DMF (5 mL) was added iodomethane (414 pL, 6.62 mmol). The reaction was stirred for 6 h at RT and was then quenched with a saturated solution of ammonium chloride. The reaction mixture was concentrated and purified by column chromatography (cyclohexane/acetone) to afford the title compound as a white solid (270 mg, 89%). 1H NMR (500 MHz, CDCl3) ppm = 7.37 – 7.32 (m, 1 H), 7.27 – 7.24 (m, 1 H), 7.02 (td, J=7.6, 1.0, 1 H), 6.73 (d, J=8.0, 1 H), 4.34 (s, 2H), 3.14 (s, 3H). Rt = 2.07 min (HPLC method C).

With the synthetic route has been constantly updated, we look forward to future research findings about 1,3-Dihydrobenzo[c]isothiazole 2,2-dioxide,belong isothiazole compound

Reference£º
Patent; MERCK PATENT GMBH; CANCER RESEARCH TECHNOLOGY LIMITED; SCHIEMANN, kai; STIEBER, Frank; BLAGG, Julian; MALLINGER, Aurelie; WAALBOER, Dennis; RINK, Christian; CRUMPLER, Simon Ross; WO2014/63778; (2014); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO53,mainly used in chemical industry, its synthesis route is as follows.,936-16-3

Step 2. A mixture of 23 (180 mg, 0.70 mmol), 1 (60 mg, 0.35 mmol), CsF (107 mg, 0.70 mmol), Cs2CO3 (458 mg, 1.41 mmol) in DMF (3 mL) was degassed and purged with N2 (3X). The mixture was stirred at 80¡ãC for 1 h, filtered, and then purified by prep-HPLC to give Compound 143 (15 mg, 5percent) as a light yellow solid. 1H NMR (DMSO-d6, 400MHz) delta 7.97 (d, 1H), 7.81 (s, 1H), 7.72 (d, 1H), 7.43 (s, 1H), 7.31 (s, 2H), 7.18 (s, 2H), 5.09 (s, 2H), 2.33 (s, 3H); LCMS (ESI): m/z 356.0 (M+H).

With the synthetic route has been constantly updated, we look forward to future research findings about 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide,belong isothiazole compound

Reference£º
Patent; NUMERATE, INC.; RAIMUNDO, Brian; KOLTUN, Elena S.; GRIFFIN, John; STANGELAND, Eric; (93 pag.)WO2018/49324; (2018); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is 3,4-Dichloroisothiazole-5-carboxylic acid, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 18480-53-0, its synthesis route is as follows.,18480-53-0

0.75 mmol of 3,4-dichloroisothiazole-5-carboxylic acid I-1 was added to a 100 ml two-neck round bottom flask.1-(3-Methylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDCI) was 0.9 mmol, 1-hydroxybenzotriazole (HOBT) was 0.77 mmol, dissolved in dichloro Methane (25 mL) was stirred in an ice bath for 15 minutes.A solution of the amine II-1 in dichloromethane (25 mL) was added to the reaction mixture, then 0.90 mmol of Et3N was added, and the reaction mixture was stirred at room temperature for 16 hours.After the reaction was completed, the organic layer was washed with water (2¡Á30 mL) and brine (40 mL).The organic layer was dried over MgSO 4 and concentrated under reduced vacuo.The residue is purified by silica gel column chromatography on 100~200 mesh to give compound III-1.The eluent was petroleum ether: ethyl acetate at 60 to 90 C, and the volume ratio was 5:1, and the yield was 56%; the amount of the compound III-1 prepared and the volume of the reaction vessel were expanded or reduced in a corresponding ratio.

With the complex challenges of chemical substances, we look forward to future research findings about 3,4-Dichloroisothiazole-5-carboxylic acid

Reference£º
Patent; Nankai University; Fan Zhijin; Yang Dongyan; Li Zhengming; Zhu Yilin; Zhou Jinghui; Guo Xiaofeng; Zhang Nailou; Wu Qifan; Yu Bin; Zhou Shuang; (19 pag.)CN110041324; (2019); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com