Tag: M.W:100-200

7716-66-7, 3-Chlorobenzo[d]isothiazole is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,7716-66-7

A dry 2-neck 500 mL round-bottom flask (RBF) was charged with sodium ethanolate (46.2 mL, 124 mmol), diluted with 151 mL absolute EtOH, cooled in an ice bath and treated dropwise with diethyl malonate (17.98 mL, 118 mmol) under an atmosphere of nitrogen. After stirring for 20 minutes, the ice bath was removed and 3-chlorobenzo[d]isothiazole (20.0 g, 118 mmol) was added in one portion and stirred for 24 hours. The reaction solution was quenched with water, extracted with ether and treated with excess 4 M HCl/dioxane. A pinkish-white precipitate was filtered off, suspended in water, basified with Na2CO3, extracted with ether, washed with water and brine, dried over sodium sulfate, filtered and concentrated to yellow solids (?20 g) which were recrystallized from ethanol/water and dried in a vacuum oven at 60¡ãC for 3 hrs to give ethyl 3-aminobenzo[b]thiophene-2-carboxylate (19.9 g, 76percent yield).

As the paragraph descriping shows that 7716-66-7 is playing an increasingly important role.

Reference£º
Patent; Universal Display Corporation; Xia, Chuanjun; Joseph, Scott; EP2826781; (2015); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

822-82-2,822-82-2, Isothiazole-4-carboxylic acid is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of the compound of Preparation 141 (1.4 g, 11.0 mmol) in tetrahydrofuran (6 ml), at -5 C., was added dropwise borane (1M in tetrahydrofuran, 16.5 ml). The reaction mixture was allowed to warm to room temperature and stirred for 18 h. The mixture was quenched by addition of water: acetic acid (1:1, 4 ml) and the mixture was concentrated in vacuo. The residue was added to saturated aqueous sodium hydrogen carbonate solution (5.5 ml) at 0 C. and the two layers were separated. The aqueous layer was extracted with ethyl acetate (750 ml) and the combined extracts were concentrated in vacuo to give the title compound (700 mg). 1H-NMR (CDCl3): 4.80-4.84 (2H), 8.69-8.71 (1H), 8.76-8.78 (1H)

The synthetic route of 822-82-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; PFIZER LIMITED; US2008/103130; (2008); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4576-90-3,Isothiazole-3-carboxylic acid,as a common compound, the synthetic route is as follows.,4576-90-3

To a slurry of isothiazole-3-carboxylic acid (5.0 g, 38.7 mmol) in terf-butanol (194 ml_) was added triethylamine (4.3 g, 42.6 mmol) followed by diphenyl phosphoryl azide (11.9 g, 43.3 mmol). The reaction mixture was heated to reflux for 9 hours. After cooling the ambient temperature, the reaction mixture was concentrated in vacuo and the residue dissolved in ethyl acetate (300 ml_). The organic layer was washed with water (100 ml_), 1 N sodium hydroxide solution (50 ml_), water (100 ml_), brine (50 ml_), and dried over anhydrous magnesium sulfate. Filtration and concentration of the filtrate in vacuo afforded a residue. Purification of the residue by column (0805) chromatography, eluting with a gradient of 0 to 10% of ethyl acetate in heptane, provided the title compound as a colorless solid (6.16 g, 79 % yield): 1FI NMR (300 MHz, CDCIs) 9.03-8.98 (m, 1 H), 8.58 (d, J = 4.9 Hz, 1 H), 7.70 (d, J = 4.9 Hz, 1 H), 1.53 (d, J = 0.7 Hz, 9H).

As the paragraph descriping shows that 4576-90-3 is playing an increasingly important role.

Reference£º
Patent; XENON PHARMACEUTICALS INC.; FOCKEN, Thilo; ANDREZ, Jean-Christophe; BURFORD, Kristen Nicole; DEHNHARDT, Christoph Martin; GRIMWOOD, Michael Edward; JIA, Qi; LOFSTRAND, Verner Alexander; WILSON, Michael Scott; ZENOVA, Alla Yurevna; WESOLOWSKI, Steven Sigmund; SUN, Shaoyi; (205 pag.)WO2020/47323; (2020); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

3-Chlorobenzo[d]isothiazole, cas is 7716-66-7, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,7716-66-7

(a) 3-(1-PIPERAZINYL)-1,2-BENZOISOTHIAZOLE STR50 A mixture of 3-chloro-1,2-benzisothiazole (37.8 g., 0.235 mole) and piperazine (304.2 g., 3.53 mole) is heated under an argon atmosphere for a period of 20 hr. at 120¡ã C. in a closed reactor. The reaction mixture is dissolved in 2 liters of water and the aqueous solution repeatedly extracted with methylene chloride. Extracts are combined, dried over magnesium sulfate and concentrated in vacuo. Residual material is taken up in ether, filtered and concentrated in vacuo to afford 24.4 g. (47percent) of 3-(1-piperazinyl)-1,2-benzisothiazole free base as a viscous oil. A sample of the free base converted to the hydrochloride salt in ether with ethanolic hydrogen chloride and crystallized from methanol-ethanol affords analytically pure 3-(1-piperazinyl)-1,2-benzisothiazole hydrochloride, m.p. 280¡ã C. (dec.). Anal. Calcd. for C11 H13 N3 S.HCl: C, 51.66; H, 5.52; N, 16.43. Found: C, 51.34; H, 5.46; N, 16.16.

As the rapid development of chemical substances, we look forward to future research findings about 7716-66-7

Reference£º
Patent; Mead Johnson & Company; US4487773; (1984); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, cas is 936-16-3, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,936-16-3

Example 85 2-[{1-(4-Fluorophenyl)-5-isobutyl-1H-pyrazol-3-yl}methyl]-2,3-dihydro[d]isothiazole 1,1-dioxide (Compound 30) To a solution of 1,2-benzisothiazoline-1,1-dioxide (97.1 mg, 0.574 mmol) in N,N-dimethylformamide (3 mL) was added potassium carbonate (793 mg, 5.74 mmol) at room temperature, followed by stirring for 10 min. The solution was slowly added with drops of methylene chloride (5 mL) in {1-(4-fluorophenyl)-5-isobutyl-1H-pyrazol-3-yl}methyl bromide (199 mg, 0.638 mmol), and stirred for a day at room temperature. When the reaction was completed as measured by TLC (Hexane:EtOAc=3:1), the reaction mixture was filtered through celite. The filtrate was neutralized with 1M HCl and an aqueous saturate sodium hydrogen carbonate solution. After extraction with ethyl acetate and water, the organic layer was dried over magnesium sulfate, filtered, and concentrated in vacuo. The concentrate was purified by column chromatography (Hexane:EtOAc=6:1) to afford the title compound (124 mg, 79percent, white solid). M.P. 119.3-122.7¡ã C.; 1H NMR (300 MHz, CDCl3) delta 7.83-7.49 (m, 3H), 7.41-7.34 (m, 3H), 7.20-7.14 (m, 2H), 6.35 (s, 1H), 4.52 (s, 2H), 4.39 (s, 2H), 2.46 (d, J=7.2 Hz, 2H), 1.87-1.73 (m, 1H), 0.84 (d, J=6.6 Hz, 6H); 13C NMR (75 MHz, CDCl3) delta 163.7, 160.4, 147.4, 144.8, 135.9, 135.1, 134.0, 132.7, 129.1, 127.7, 127.6, 124.6, 121.3, 116.2, 115.9, 106.1, 53.5, 50.0, 41.3, 35.1, 28.3, 22.4

As the rapid development of chemical substances, we look forward to future research findings about 936-16-3

Reference£º
Patent; KOREA INSTITUTE OF SCIENCE AND TECHNOLOGY; NAM, Ghil Soo; CHOI, Kyung Il; KIM, Jung Hyun; PAE, Ae Nim; HONG, Jin Ri; LEE, Jae Kyun; (30 pag.)US2015/329533; (2015); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.27148-03-4,Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide,as a common compound, the synthetic route is as follows.,27148-03-4

a solution of thiosaccharinate (0.26 g, 1.33 mmol) in hot water (30 cm3) was added to a solution of cis-[PtCl2(NH3)2] (0.20 g, 0.667 mmol) in hot water (15 cm3). The mixture was reuxed for 2 h. The light-brown solid formed was ltered off washed several times with distilled water and dried in vacuo. Yield: 89% (0.39 g). Anal. Calcd. for C14H14N4O4PtS4: C, 26.88; H, 2.26; N,8.96. Found: C, 26.33; H, 2.09; N, 8.86%. IR (KBr) (nu, cm-1): 3471 m, 3413 m, 3286 m, 1627s,1440w, 1373s, 1315s, 1236 m, 1155 m, 1126s, 1008w, 817 s, 515 m. 1H NMR (d6-DMSO): 7.96-7.90 (m, 4H), 7.82-7.75 (m, 4H), 4.54 (s, 6 H). 13C{1H} NMR (d6-DMSO): 182.8, 137.6,133.7, 133.4, 133.1, 124.3, 120.7 ppm.

As the paragraph descriping shows that 27148-03-4 is playing an increasingly important role.

Reference£º
Article; Al-Jibori, Subhi A.; Al-Jibori, Ghassan H.; Al-Hayaly, Lamaan J.; Wagner, Christoph; Schmidt, Harry; Timur, Suna; Barlas, F. Baris; Subasi, Elif; Ghosh, Shishir; Hogarth, Graeme; Journal of Inorganic Biochemistry; vol. 141; 1; (2014); p. 55 – 57;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Isothiazole-4-carboxylic acid, cas is 822-82-2, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,822-82-2

To a solution of l-[4-[ethyl(tetrahydropyran-4-yl)amino]-5-oxido-6,7-dihydro- thieno[3,2-d]pyrinnidin-5-iunn-2-yl]azetidin-3-ol (5.0 mg, 14 muiotatauiotaomicronIota) in DCE (0.2 mL) was added solutions of 4-isothiazolecarboxylic acid (2.7 mg in 0.2 mL DCE, 21 muiotatauiotaomicronIota), DMAP (0.52 mg in 0.1 mL DCE, 4.3 muiotatauiotaomicronIota) and EDAC (4.1 mg in 0.1 mL DCE, 21 muiotatauiotaomicronIota). The mixture was shaken at 50 C for 20 minutes before it was concentrated in vacuo. Prep HPLC purification (basic) afforded the title compound as colorless oil. 1H NMR (DMSO-d6) delta: 9.81 (s, 1H), 9.00 (s, 1H), 5.52 – 5.45 (m, 1H), 4.84 – 4.68 (m, 1H), 4.53 – 4.40 (m, 2H), 4.13 (dd, 2H), 3.97 (td, J = 11.2, 4.3 Hz, 2H), 3.71 – 3.56 (m, 2H), 3.51 – 3.43 (m, 1H), 3.43 – 3.34 (m, 2H), 3.25 – 3.18 (m, 1H), 3.07 – 2.97 (m, 2H), 1.95 – 1.82 (m, 2H), 1.75 (d, J = 12.3 Hz, 1H), 1.62 (d, 1H), 1.19 (t, J = 6.9 Hz, 3H). HPLC-Retention time (XE Metode 7 CM) : 1.95 minutes. Detected “M + l”-mass: 464.15.

As the rapid development of chemical substances, we look forward to future research findings about 822-82-2

Reference£º
Patent; LEO PHARMA A/S; LARSEN, Jens; (110 pag.)WO2019/57806; (2019); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.936-16-3,2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide,as a common compound, the synthetic route is as follows.,936-16-3

Example 87 2-[{1-(tert-butyl)-5-phenyl-1H-pyrazol-3-yl}methyl]-2,3-dihydro[d]isothiazole 1,1-dioxide (Compound 32) To a solution of N,N-dimethylformamide (0.9 mL) in 1,2-benzisothiazoline-1,1-dioxide (10.6 mg, 0.063 mmol) was added potassium carbonate (83.9 mg, 0.607 mmol) at room temperature, followed by stirring for 10 min. This solution was slowly added with drops of {1-(tert-butyl)-5-phenyl-1H-pyrazol-3-yl}methyl bromide (18.7 mg, 0.064 mmol) in methylene chloride (3 mL), and stirred for a day at room temperature. When the reaction was completed as measured by TLC (Hexane:EtOAc=4:1), the reaction mixture was filtered through celite. The filtrate was neutralized with 1M HCl and an aqueous saturate sodium hydrogen carbonate solution. After extraction with ethyl acetate and water, the organic layer thus formed was dried over anhydrous magnesium sulfate, filtered, and concentrated in vacuo. The concentrate was purified by column chromatography (Hexane:EtOAc=6:1?2:1) to afford compound 23 (9.50 mg, 40percent, white solid).

As the paragraph descriping shows that 936-16-3 is playing an increasingly important role.

Reference£º
Patent; KOREA INSTITUTE OF SCIENCE AND TECHNOLOGY; NAM, Ghil Soo; CHOI, Kyung Il; KIM, Jung Hyun; PAE, Ae Nim; HONG, Jin Ri; LEE, Jae Kyun; (30 pag.)US2015/329533; (2015); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, cas is 936-16-3, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,936-16-3

Example 27. 4-(1,1-Dioxido-1,2-benzisothiazol-2(3H)-yl)-2-piperazin-1-ylquinazoline. 2,4-Dichloroquinazoline (60 mg, 0.30 mmol), 2,3-dihydro-l,2-benzisothiazole 1,1-dioxide (50 mg, 0.30 mmol) and sodium hydride (11 mg, 0.45 mmol) were dissolved in anhydrous DMF (2 ml). The mixture was heated at 60¡ã C under nitrogen atmosphere for 10 min. Piperazine (52 mg, 0.60 mmol) was added and the heating was continued for 10 minutes. 5 The reaction mixture was diluted with water (0.5 ml), filtered and purified by preparative HPLC to give the acetate of the title compound as a solid (36 mg, 27 percent). 1H NMR (400 MHz, MeOD-d4) delta ppm 8.49 (1 H3 d) 7.58 – 7.87 (6 H, m) 730 – 7.38 (1 H, m) 5.58 (2 H, s) 4.03 – 4.16 (4 H3 m) 3.15 – 3.26 (4 H3 m); ESI-MS m/z M+H+ 382.

As the rapid development of chemical substances, we look forward to future research findings about 936-16-3

Reference£º
Patent; ASTRAZENECA AB; WO2007/108743; (2007); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, cas is 27148-03-4, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,27148-03-4

General procedure: For 6: A solution of thiosaccharin (tsacH) (0.06 g, 0.307 mmol) in chloroform (8 cm3) was added to a solution of [PtCl2(kappa2-dppm)] (0.10 g, 0.154 mmol) in chloroform (10 cm3). A few drops of triethylamine were added and the resulting mixture was heated under reflex for 1 h. This produced a yellow solution was filtered off and reduced to half volume. Methanol (2 cm3) was added and the mixture was set a side to evaporate slowly at room temperature. The yellow crystalline solid thus formed was filtered off and dried in a vacuum oven (0.12 g, 91%).

As the rapid development of chemical substances, we look forward to future research findings about 27148-03-4

Reference£º
Article; Al-Jibori, Subhi A.; Al-Jibori, Mohamed H.S.; Hogarth, Graeme; Inorganica Chimica Acta; vol. 398; (2013); p. 117 – 123;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com