Tag: M.W:100-200

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.24340-77-0,4-Bromoisothiazole,as a common compound, the synthetic route is as follows.

Step 1: Synthesis of 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)isothiazole To a stirred solution of 4-bromoisothiazole (0.2 g, 1.21 mmol) and Bis(pinacolato)diboron (0.464 g, 1.81 mmol) in Dioxane (10 mL) was added AcOK (0.358 g, 3.61 mmol) along with TPP (0.032 g, 0.12 mmol) and reaction mass was purged with nitrogen for 30 min. Then, Pd2(dba)3 (0.056 g, 0.061 mmol) was added to it and stirred at 100 C. for 16 h. Reaction was monitored by TLC. On completion reaction mass was concentrated under reduced pressure and extracted with ethyl acetate. The organic layer was washed with water, brine, dried over sodium sulphate, concentrated under reduced pressure obtained crude which was purified column chromatography; eluent 3% EtOAc/Hexane to afford 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)isothiazole (0.07 g, 27%) as yellow solid. MS: 212.1[M++1]

24340-77-0, The synthetic route of 24340-77-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Mankind Pharma Ltd.; Patil, Rakesh Ishwar; Verma, Jeevan; Shah, Dharmesh; Ali, Sazid; Bapuram, Srinivasa Reddy; Rai, Santosh Kumar; Kumar, Anil; (146 pag.)US2017/291910; (2017); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

A common heterocyclic compound, the isothiazole compound, name is 3-Chlorobenzo[d]isothiazole,cas is 7716-66-7, mainly used in chemical industry, its synthesis route is as follows.,7716-66-7

(a) 3-(1-PIPERAZINYL)-1,2-BENZOISOTHIAZOLE STR50 A mixture of 3-chloro-1,2-benzisothiazole (37.8 g., 0.235 mole) and piperazine (304.2 g., 3.53 mole) is heated under an argon atmosphere for a period of 20 hr. at 120 C. in a closed reactor. The reaction mixture is dissolved in 2 liters of water and the aqueous solution repeatedly extracted with methylene chloride. Extracts are combined, dried over magnesium sulfate and concentrated in vacuo. Residual material is taken up in ether, filtered and concentrated in vacuo to afford 24.4 g. (47%) of 3-(1-piperazinyl)-1,2-benzisothiazole free base as a viscous oil. A sample of the free base converted to the hydrochloride salt in ether with ethanolic hydrogen chloride and crystallized from methanol-ethanol affords analytically pure 3-(1-piperazinyl)-1,2-benzisothiazole hydrochloride, m.p. 280 C. (dec.). Anal. Calcd. for C11 H13 N3 S.HCl: C, 51.66; H, 5.52; N, 16.43. Found: C, 51.34; H, 5.46; N, 16.16.

As the rapid development of chemical substances, we look forward to future research findings about 7716-66-7

Reference£º
Patent; Mead Johnson & Company; US4487773; (1984); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

A common heterocyclic compound, the isothiazole compound, name is Isothiazole-4-carboxylic acid,cas is 822-82-2, mainly used in chemical industry, its synthesis route is as follows.,822-82-2

To a solution of 1,2-thiazole-4-carboxylic acid (10.0 g, 77.4 mmol) in methanol (200 mL) was added drop-wise thionyl chloride (8 mL) and the mixture was stirred at reflux for 2h. The mixture was cooled to RT and the solvent was evaporated to give product as brown solid (11.0 g, 99%).

As the rapid development of chemical substances, we look forward to future research findings about 822-82-2

Reference£º
Patent; VERNALIS (R&D) LIMITED; BROUGH, Paul Andrew; MACIAS, Alba; ROUGHLEY, Stephen David; WANG, Yikang; PARSONS, Rachel Jane; NORTHFIELD, Christopher John; WO2015/40425; (2015); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

A common heterocyclic compound, the isothiazole compound, name is 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide,cas is 936-16-3, mainly used in chemical industry, its synthesis route is as follows.,936-16-3

To a solution of {5-(4-fluorophenyl)-1-isobutyl-1H-pyrazol-3-yl}methanol (19.4 mg, 0.078 mmol) in methylene chloride (1 mL) were added PPh3 (42.8 mg, 0.163 mmol) and CBr4 (66.3 mg, 0.200 mmol) at 0¡ã C., followed by stirring at the same temperature for 30 minute to give {5-(4-fluorophenyl)-1-isobutyl-1H-pyrazol-3-yl}methyl bromide. When the reaction was completed as measured by TLC (Hexane:EtOAc=2:1), drops of 1,2-benzisothiazoline-1,1-dioxide (24.3 mg, 0.078 mmol) N,N-dimethylformamide (1.5 mL) were slowly added to the solution. (0338) Then, potassium carbonate (113 mg, 0.816 mmol) were added at the same temperature, and the resulting solution was stirred for a day. When the reaction was completed as measured by TLC (Hexane:EtOAc=2:1), water was added, after which extraction was carried out with ethyl acetate and brine. The organic layer thus formed was dried over anhydrous magnesium sulfate, filtered, and concentrated in vacuo. The concentrate was purified by column chromatography (Hexane:EtOAc=2:1) to afford the title compound (19.2 mg, 62percent percent, white solid). (0339) M.P. 110.8-118.2¡ã C.; (0340) 1H NMR (300 MHz, CDCl3) delta 7.61-7.52 (m, 2H), 7.46-7.33 (m, 4H), 7.18-7.12 (m, 2H), 6.41 (s, 1H), 4.56 (s, 2H), 4.41 (s, 2H), 3.91 (d, J=7.5 Hz, 2H), 2.26-2.08 (m, 1H), 0.80 (d, J=6.7 Hz, 6H); (0341) 13C NMR (75 MHz, CDCl3) delta 146.0, 144.5, 136.8, 135.2, 134.0, 133.0, 132.6, 131.0, 130.8, 129.2, 129.1, 124.8, 124.5, 121.4, 115.9, 115.6, 106.3, 56.7, 49.9, 45.7, 41.2, 29.6, 19.8

As the rapid development of chemical substances, we look forward to future research findings about 936-16-3

Reference£º
Patent; KOREA INSTITUTE OF SCIENCE AND TECHNOLOGY; NAM, Ghil Soo; CHOI, Kyung Il; KIM, Jung Hyun; PAE, Ae Nim; HONG, Jin Ri; LEE, Jae Kyun; (30 pag.)US2015/329533; (2015); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

A common heterocyclic compound, the isothiazole compound, name is 3-Chlorobenzo[d]isothiazole,cas is 7716-66-7, mainly used in chemical industry, its synthesis route is as follows.,7716-66-7

(1) A dry 2-neck 500mL RBF was charged with 21percent sodium ethanolate (46.2 ml, 124 mmol), diluted with 151 mL absolute EtOH, cooled in an ice bath and treated dropwise with diethyl malonate (18 mL, 118 mmol) under an atmosphere of nitrogen. After stirring for 20 minutes, the ice bath was removed and 3-chlorobenzo[d]isothiazole (20.0 g, 118 mmol) was added in one portion and stirred for 24 hours. The reaction solution was quenched with water, extracted with ether and treated with excess 4M HCl/dioxane. The resulting pinkish-white precipitate was filtered off, suspended in water, basified with Na2CO3, extracted with ether, washed with water and brine, dried over sodium sulfate, filtered and concentrated to yellow solids (?20g) which were recrystallized from ethanol/water and dried in a vacuum oven at 60¡ãC for 3 hrs affording 19.9 g (76percent yield) of the ethyl 3-aminobenzo[b]thiophene-2-carboxylate.

As the rapid development of chemical substances, we look forward to future research findings about 7716-66-7

Reference£º
Patent; Universal Display Corporation; Joseph, Scott; Boudreault, Pierre-Luc T.; Dyatkin, Alexey Borisovich; Li, David Zenan; Xia, Chuanjun; Yamamoto, Hitoshi; EP2910555; (2015); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

A common heterocyclic compound, the isothiazole compound, name is 3-Chlorobenzo[d]isothiazole,cas is 7716-66-7, mainly used in chemical industry, its synthesis route is as follows.,7716-66-7

Preparation Example 20: 3-(4-(Benzo[d]isothiazoI-3-yl)piperazin-l- yl)propan-l-amine dihydrochloride; A mixture of piperazine (10.2 g, 0.118 mmol) and 3-chloro-l ,2- benzisothiazole (4.0 g, 0.024 mmol) in t-BuOH (4 mL) was refluxed overnight. The reaction mixture was poured into water (100 mL) and extracted with toluene (200 mL). The organic phase was dried over MgSO4 and evaporated until about 20 mL remained, under vacuum. The resulting suspension was cooled at 0-5 0C overnight. The precipitate was filtered and dried under vacuum to provide 3-(piperazin- l-yl)benzo[d]isothiazole as an intermediate (3.36 g, 15.4 mmol, 65 percent). MH+ 220A mixture of 3-(piperazin-l-yl)benzo[-i]isothiazole (1.75 g, 8.0 mmol), N-(3-bromopropyl)-phthalimide (1.96 mmol, 7.3 mmol) and K2CO3 (2.21 g, 16.0 mol) in DMF (10 mL) was stirred at 80 0C for 3 hours. The reaction mixture was poured into water (100 mL) and extracted with ethyl acetate (150 mL). The organic phase was dried over MgSO4 and evaporated under vacuum. The residue was further purified by flash column chromatography to provide 2-(3-(4- (benzo[d]isothiazol-3-yl)piperazin-l-yl)propyl)isoindoline-l ,3-dione as an intermediate (1.49 g, 3.67 mmol, 50 percent).To a solution of 2-(3-(4-(benzo[y]isothiazol-3-yl)piperazin-l- yl)propyl)isoindoline- l ,3-dione (1.49 g, 3.67 mmol) in EtOH (25 mL) was added Hydrazine monohydrate (2.5 mL). The mixture was stirred at 80 0C for 1-2 hours and cooled to room temperature. The reaction mixture was poured into water (100 mL) and extracted with DCM (150 mL). The organic phase was dried over MgSO4 and evaporated under vacuum. The residue was redissolved in ether (20-30 mL) and HCl solution (3 mL, 2M in ether) was added to the solution. The resulting precipitate was collected on a filter funnel and dried under vacuum to provide the title compound as HCl salt form (1.1 g, 3.15 mmol, 86 percent).1R NMR (400 MHz, CD3OD3) delta 8.04 (d, J = 8.4 Hz, IH), 7.94 (d, J = 8.0 Hz, IH), 7.55 (t, J = 7.2 Hz, IH), 7.45 (t, J = 7.6 Hz, IH), 4.24- 4.14 (br, 2H), 3.85 (t, J = 7.2 Hz, IH), 3.76-3.66 (br, 2H), 3.59-3.32 (m, 9H), 3.08 (t, J = 7.6 Hz, IH), 2.34-2.30 (m, IH), 2.25-2.17 (m, 2H).MH+ 277

As the rapid development of chemical substances, we look forward to future research findings about 7716-66-7

Reference£º
Patent; GREEN CROSS CORPORATION; LEE, Jinhwa; KANG, Suk Youn; PARK, Eun-Jung; SONG, Kwang-Seop; KIM, Min Ju; SEO, Hee Jeong; LEE, Suk Ho; KIM, Jeongmin; PAE, Ae Nim; PARK, Woo-Kyu; WO2010/38948; (2010); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.24340-77-0,4-Bromoisothiazole,as a common compound, the synthetic route is as follows.

To a reaction flask were added compound 41 (100 mg, 0.19 mmol), 4-bromoisothiazole (50 mg, 0.27 mmol), Pd(dppf)Cl2 (5 mg, 0.006 mmol) and sodium carbonate (60 mg, 0.558 mmol), 5 mL glycol dimethyl ether and 0.9 mL water were added, bubbled with nitrogen gas for 10 minutes, and the reaction was heated to 100 C in microwave and reacted for half an hours. After TLC detected the reaction was complete, the reaction was concentrated, purified by silica gel column chromatography to afford 58 mg of a product, yield: 63%. LC-MS(APCI): m/z = 485.3 (M+1)+. 1H NMR (400 MHz, CDCl3) delta 10.23 (s, 1H), 9.09 (s, 1H), 8.77 (d, J = 2.0 Hz, 1H), 8.72 (s, 1H), 8.10 (d, J = 2.0 Hz, 1H), 7.87 (d, J = 9.0 Hz, 2H), 7.34 (d, J = 8.7 Hz, 2H), 5.47 (d, J = 3.5 Hz, 1H), 4.94 (d, J = 51.5 Hz, 1H), 4.18 (s, 1H), 3.64 (ddd, J = 41.8, 13.5, 3.1 Hz, 1H), 3.43 – 3.38 (m, 1H), 3.02 (d, J = 11.9 Hz, 1H).

24340-77-0, As the paragraph descriping shows that 24340-77-0 is playing an increasingly important role.

Reference£º
Patent; Shenzhen Targetrx, Inc.; WANG, Yihan; ZHAO, Jiuyang; AL, Yixin; (51 pag.)EP3553057; (2019); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

A common heterocyclic compound, the isothiazole compound, name is 3,4-Dichloroisothiazole-5-carboxylic acid,cas is 18480-53-0, mainly used in chemical industry, its synthesis route is as follows.,18480-53-0

Preparation of the Starting Material At room temperature, 146 g (1.23 mol) of thionyl chloride are added dropwise with stirring over a period of 5 minutes to 8.92 g (0.045 mol) of 3,4-dichloro-isothiazole-5-carboxylic acid. Four drops of dimethylformamide are then added and the reaction mixture is heated under reflux for one hour. The reaction mixture is subsequently cooled to room temperature and concentrated under reduced pressure. In this manner, 12.19 g of 3,4-dichloro-isothiazole-5-carbonyl chloride are obtained in the form of an orange oil.

As the rapid development of chemical substances, we look forward to future research findings about 18480-53-0

Reference£º
Patent; Bayer Aktiengesellschaft; US6277791; (2001); B1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7716-66-7,3-Chlorobenzo[d]isothiazole,as a common compound, the synthetic route is as follows.

7716-66-7, PREPARATION 3 3-(1-Piperazinyl)-1,2-benzisothiazole ¡¤ hydrochloride Anhydrous piperazine (49.4 g, 0.57 mol) and t-butanol (10 mL) were added to a dry, 300 mL round bottom flask equipped with a mechanical stirrer, thermometer, condenser topped with a nitrogen inlet, and pressure-equalizing dropping funnel. After the flask was purged with nitrogen, it was heated to 100 C. in an oil bath. A solution of 3-chloro-1,2-benzisothiazole (19.45 g, 0.11 mol) in t-butanol (10 mL) was added to the addition funnel, and then slowly added to the reaction flask over 20 minutes to moderate an exothermic reaction (112-118 C.). Once addition was complete the yellow solution was heated to reflux (121 C.) and then maintained at reflux for 24 hours. Thin-layer chromatography showed that the reaction was complete. The reaction mixture was cooled to 85 C. and 120 mL of water was added. The hazy solution was filtered and the filter cake rinsed with 60 mL of t-butanol/water (1:1) solution. The pH of the combined filtrate and wash was adjusted to 12.2 with 50% aqueous caustic. The aqueous solution was extracted with toluene (200 mL), the layers were separated, and the aqueous layer was extracted with fresh toluene (100 mL). The combined toluene layers were washed with water (75 mL), and then the toluene solution was concentrated in vacuo at 48 C. to 90 mL. Isopropanol (210 mL) was added to the concentrate and then the pH was slowly adjusted to 3.8 with 7.6 mL of concentrated hydrochloric acid. The resulting slurry was cooled to 0 C., granulated for 45 min, and then filtered. The filter cake was washed with cold isopropanol (50 mL) and then dried in vacuo at 40 C. to afford 23.59 g (80% yield) of 3-(1-piperazinyl)-1,2-benzisothiazole hydrochloride as an off white solid.

7716-66-7 3-Chlorobenzo[d]isothiazole 598190, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; Pfizer Inc.; US5935960; (1999); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.18480-53-0,3,4-Dichloroisothiazole-5-carboxylic acid,as a common compound, the synthetic route is as follows.

3,4-Dichloroisothiazole-5-carboxylic acid (CAS 18480-53-0, 34.8 mg, 0.18 mmol) was dissolved in DMF (200 iL). HBTU (83 mg, 0.22 mmol) and TEA (61.1 iL, 0.44 mmol) were added. The solution was stirred for 6 mm and then 4-(2-amino-3-methylbutanoyl)benzonitrile hydrochloride (Example 49b, 35 mg, 0.15 mmol) in DMF (400 iL) and TEA (61.1 iL, 0.44 mmol) was added. The reaction mixture was stirred at rt for 1 h and then purified by preparative HPLC to give 3,4-dichloro-N-(1-(4-cyanophenyl)-3-methyl-1-oxobutan-2-yl)isothiazole-5-carboxamid (15 mg, 28percent).1H NMR (500 MHz, CDCI3) 5 ppm 0.87 (d, 3 H) 1.12 (d, 3 H) 2.26 – 2.36 (m, 1 H) 5.75 (dd, 1 H)7.74 (d, 1 H) 7.86 (d, 2 H) 8.12 (d, 2 H).MS (ESI) m/z 379.7 [M-H], 18480-53-0

As the paragraph descriping shows that 18480-53-0 is playing an increasingly important role.

Reference£º
Patent; ACTURUM LIFE SCIENCE AB; LINDE, Christian Erik; PAULSEN, Kim; SOHN, Daniel; SVENSSON, Mats A; VALLIN, Karl S A; WEIGELT, Dirk; MINIDIS, Alexander; WO2014/184235; (2014); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com